27
Picture 65 Picture 66
(6) TARGET PULSE：
A. When LCD flashing display TARGET images, press MODE KEY, then press SET to switch to choose
TARGET DISTANCE function , LCD stay shining display TARGET , PULSE flashing display (picture
67), press MODE KEY to start the PULSE setting function.
B. LCD stay shining ”SET ” .(picture 68)，PULSE screen flashing display the preset value 100. Press “SET”
key , set the target PULSE，setting range is from30~230，it can be setting in cycle, press MODE KEY,
buzzer rings 0.5 second then enter into exercise mode .
C. LCD switch to display ” TARGET”、” PULSE”every 2 second (picture69~ picture 70) ，TIME、
DISTANCE、CALORIES、PULSE、SPM、WATT、TOTAL STROKES & STROKES start counting
according to the operation data,，CALORIES、PULSE、SPM、WATT、TOTAL STROKES &
STROKES switch to display every 5 second .
D. During exercise, when the actual heart rate exceeds the preset heart rate, the buzzer rings BI every 1
second.
E. During exercise , press MODE KEY, stop working and LCD flashing display STOP, TIME , DISTANCE
is shining and display the current sports data. CALORIES, PULSE, TOTAL STROKES and STROKES
switch to display the current sports data every5 seconds . PULSE show instant heart rate value, and then
press MODE KEY , at this time , the console continue to implement the working screen, if press the
RESET KEY, the console enter the standby screen, if the STOP condition, no press any keys or end
working after 4 minutes,The console enters the standby mode.
F. When start to work, without pressing any key, no RPM signal, and no heartbeat signal input , after 4
minutes, the buzzer goes into standby mode for 0.5 seconds.
