54473
7
Zoom out
Zoom in
Vorherige Seite
1/44
Nächste Seite
Topcom Allure 200 7
Topcom Allure 200
ENGLISH
5.4 Ringer volume
When you receive a phone call, the unit will ring. The ring volume can be adjusted by means of the Ring Volume switch
at the bottom of the phone (Hi- , Lo- ).
5.5 Flash Key
Press the Flash button (R) to use certain services as ‘Call Waiting’ (if this service is provided by your telephone
company); or to transfer phone calls when you are using a telephone exchange (PABX).
The flashtime can be selected by the switch on the bottom of the phone (100/300/600ms).
6 CALLER ID
6.1 General information
When you have a subscription to the Caller ID service, the caller’s phone number and name (when supported by the
network) will appear on the display. If you saved the telephone number with the name in the Phone Book, the
programmed name will be shown on the display (name tagging function).
6.2 Call list
The size of the call list has been set when initializing the telephone. The phone numbers you have received more then
once, will not be stored, but the repeat indicator REP will be displayed. Every incoming number is saved in the Call List
with indication of date and time.
In standby mode the number of received calls is shown on the display ‘ALL CALLS 000 (always English). The new
message LED will blink until you have checked all New messages.
6.2.1 Scr
olling through the Call List
You can scroll through the Call list by pressing the Up - or Down button.
If no button is pressed within 15 seconds, you will return to standby mode.
6.2.2 Calling a n
umber from the Call List
Select the desired telephone number.
Press the Dial button . The number will be dialled automatically in handsfree mode.
If you want to dial the long prefix (see 4.5), press the dial button twice.
•Pick up the handset if you want to communicate over the handset.
6.2.3 Erasing n
umbers from the Call List
a) Erasing one number
Select the number you wish to erase.
Press the Erase button briefly. “ERASED” appears on the display.
The next number in the call list is displayed.
b) Erasing the entire Call List
Enter the Call List and select a number not indicated with VIP (see 6.3)
Press the Erase button for 2 seconds , “ALL ERASED“ appears on the display.
When erasing the entire call list, VIP numbers will remain saved (see 6.3).
6.3 VIP list
Numbers can be protected to be removed out of the call list when selecting ‘erase all’. Therefore the number must be
assigned as VIP.
All VIP numbers are visible in the Call list, but can also be checked in a separate VIP list.
6.3.1 Assigning a n
umber to the VIP list.
Scroll through the Call list by pressing the Up or Down button.
Press the VIP button. The VIP icon will be displayed.
6.3.2 Selecting and calling a n
umber from the VIP List
Press the VIP button repeatedly to scroll through the VIP list
Press the Dial button . The number will be dialled automatically in handsfree mode.
•Pick up the handset if you want to communicate over the handset.
All_200NFEDSp.book Page 7 Tuesday, February 3, 2004 10:42 AM
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

topcom-allure-200

Suche zurücksetzen

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Topcom Allure 200 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info