Bedienungsanleitung Topcom axiss 810 cid (Seite 6 von 96) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

300900

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

6 Topcom Axiss 810

Topcom Axiss 810

7.9 Ringer volume

At the back panel of the telephone you find a

switch that can set three different ring

volumes.

Choose the most comfortable volume.

8 Operation

8.1 Making a call

• Enter the telephone number.

• Press to delete a wrongly entered digit.

• Pick up the handset or press or to

make a hands-free call.

The call duration timer will start in the display 6

seconds after the number was dialled.

8.2 Receiving a call

• When a call comes in, the phone will ring and

the ringer LED will blink.

• Pick up the handset or press to take the

call hands-free.

8.3 Deactivating the microphone

During a call you can deactivate the microphone

and talk freely without the caller hearing you.

• Press and hold to mute the microphone.

8.4 Putting a call on hold

During a call you can put the caller on hold. During

this time the caller will hear an electronic melody.

• Press during the conversation and hang-

up the handset.

The other party will be on hold

• To continue the conversation, pickup the

handset or press for hands-free mode.

8.5 Last number redial

The phone will store the 16 latest dialed numbers

together with the call duration.

• Press to go through your latest dialed

numbers (“

OUT” will appear in the display).

• Pick up the handset or press or to

make a hands-free call.

• Press twice to delete a number.

8.6 Incoming Caller ID list

The phone can store up to 158 incoming numbers

(depending on the length of the number) together

with the time and date of the call.

• Press / to go through the incoming

numbers (“

IN” will appear in the display).

• Press twice to delete a number.

• Pick up the handset or press or to

make a hands-free call.

The volume of the handset can be set to

HI or LO by using switch .

During a call made with the handset you

can switch to hands-free by pressing

and hanging up the handset.

The hands-free volume can be adjusted

using the volume button .

In case the telephone is connected to a

PBX system it might be necessary to add

a pause after the PBX access code. The

phone can generate a 4 second pause

time.

Example: 0 P 012345678

– Press to enter a pause.

Secret numbers will be displayed as

“

-------------------- UNAVAILABLE”.

The LED will blink when you have new

missed calls. Missed calls will be

displayed together with “

NEW”.

If a long distance code (see “7.5 Long

distance code (prefix)”) is programmed,

you can add this code automatically by

pressing twice to dial the number.

For example:

Long distance code: 1234

Number in the caller ID list: 012345678

• Press twice.

The number dialled by the phone is

1234012345678

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Topcom axiss 810 cid Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info