Bedienungsanleitung Topcom axo 300 (Seite 10 von 15) (Deutsch, Englisch, Holländisch, Französisch)

299617

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

4.5. TEMPORARY MEMOR Y

You have the possibility to save a telephone number during a conversation in

a temporary memory.

Proceed as follows :

1. Pick up the receiver or press the speaker button.

2. Dial the telephone number (max. 32 digits).

3. Press the temporary memory button.

4. Put back the receiver.

In order to recall this telephone number, pick up the receiver and press the

temporary memory button.

4.6. MUTE BUTTON

When you press the Mute button during your conversation, your partner can

no longer hear you as long as you keep this button pressed.

The display shows the symbol which indicates that the Mute function is

activated.

To continue the conversation, press the Mute button again and the symbol

will no longer be visible on the display.

4.7. R BUTTON

The R button, also called ﬂash or recall. This button generates a line interrup-

tion. It gives you the possibility to use special telephone services.

This button can also be used to transfer phone calls when you have a tele-

phone exchange. Put the AGC ON/OFF switch on position OFF.

4.8. LAST NUMBER REDIAL

The last number dialled on the keypad is saved. If you wish to redial this num-

ber, pick up the receiver and press the redial button : the last number dialled

will be redialled automatically.

4.9. HANDSFREE CALLING

When you want to make a call handsfree, press the speaker button. As soon as

you hear the dialling tone, dial the telephone number and you can have a con-

Axo 300

3. Press the Set button.

4. Dial the telephone number (max. 16 digits).

5. Press the button of your choice (M1-M6).

6. Put down the receiver or press de speaker button again.

7. Put the PROG ON/OFF switch on position OFF.

8. Note down the information on the index card.

While programming a number, you can answer an incoming call by putting the

PROG ON/OFF switch on position OFF and picking up the receiver.

To call a direct memory number, pick up the receiver and press directly the but-

ton of your choice (M1-M6).

To call a indirect memory number, pick up the receiver, press the memory but-

ton and press the button of your choice (0-9).The programmed number will be

dialled automatically.

4.4. PAUSE SETTING

The Pause button is used to program a pause of 3.5 seconds in the memory

numbers, if necessary (for example behind a telephone exchange or PABX).

Procedure to program a pause in a memory number :

1. Put the PROG ON/OFF switch on position ON.

2. Press the speaker button or pick up the receiver.

3. Press the set button.

4. Dial the number ( for example 0) to request for the external line.

5. Press the pause button* (a pause of 3,5 seconds is inserted).

6. Dial the telephone number.

7. Press the set button followed by a memory place number (0-9 or M1-M6).

8. Press the speaker button again or put down the receiver.

* REMARK : THIS BUTTON CAN BE USED IN TWO WAYS :

- As a redial button, if it is the ﬁrst button that is being pressed.

- As a pause button, if this is programmed in a memory number.

Axo 300

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Topcom axo 300 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info