Bedienungsanleitung Topcom Butler 136 (Seite 23 von 33) (Deutsch, Englisch, Holländisch, Französisch)

462209

Zoom out

Zoom in

Vorherige Seite

1/33

Nächste Seite

42 43

Remark

• When you are at the top of the list (last call), “head of list” is shown. Press “2” to go

back.

• When you are at the beginning of the list (oldest call), “tail of list” is shown. Press “1”

to go down.

• If the number has more than 9 digits, press “3” to see the rest of the number.

7.2.3 To erase a stored number

When you want to erase a number from the Caller-ID List, press and hold the

number “8” for about 1 second. The number will be erased from the Caller-ID

List.

7.2.4 To erase the entire list

It is possible to erase all the calls from the Caller-ID List that have already been

read (no new, nor unread calls). Erasing the calls is only possible when the total

number and new calls is shown on the display.

• Press the Set button in standby mode to go to the Set menu.

• Press the Paging button and the total number and the new calls are shown on

the display.

• Press and hold “8” for 1 second and the phone asks your confirmation to

erase the calls.

• Press “8” again to confirm or press another button to stop the phone from

erasing the calls.

• After having erased the calls, only the number of new calls is shown on the

display.

8 TROUBLESHOOTING

The handset does not ring

• Are the batteries charged ? (check if the display is working)

• Perhaps the handset is programmed not to ring (see 6.5.1 Ring volume of

handset)

The display does not function

• Check if the batteries are connected well.

• Check if the battery charger contacts are not damaged or dirty.

Indicators on the base station do not function

• Check if the adaptor and the telephone plug have been connected in the

c o r rect socket on the bottom of the base station.

• Check the power supply of the adaptor.

• Check if the delivered adaptor has been used.

Bad connection

• The handset is too far away from the base station, move closer.

You hear an intermittent beep during the conversation

• You are too far away from the base station, if you do not move closer to the

base station within 10 seconds, the conversation will be broken.

• Possibly the 15 minutes conversation timer is activated. Press a numerical

button (0-9) to continue the conversation.

• When the battery symbol appears on the display of the handset or the low

battery indicator lights, the battery needs to be charged.

9 SETTINGS

Clear all memory. Clears the following memories :

1 x

• Erases redial memory

• All phone number memories

• Flash time is set as flash 100ms

• Erases all PABX codes

R function programming

2 x

x= 1 : /

x= 2 : flash 100 ms

x= 3 : flash 115 ms

x= 4 : flash 270 ms

x= 5 : flash 600 ms

PABX access code

3 x y z

x= 1 : PABX group 1

x= 2 : PABX group 2

x= 3 : PABX group 3

y= 1 : 3 seconds pause (1P)

y= 2 : 7 seconds pause (2P)

z= PABX access code (max 2 digits)

Key tone

4 x

X=1 : Key tone ON

X=2 : Key tone OFF

Butler 131/136 Butler 131/136

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Topcom Butler 136 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info