Bedienungsanleitung Topcom butler 2900 (Seite 7 von 56) (Deutsch, Englisch, Holländisch, Französisch, Spanisch)

298476

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Topcom Butler 2900 / Twin / Triple 7

Topcom Butler 2900 / Twin / Triple

ENGLISH

When you are in the middle of a conversation and the battery is almost empty, the handset will emit a warning signal.

Place the handset on the base unit to charge.

5. OPERATION

5.1 OUTGOING CALLS

5.1.1 Making a phone call

• Press the Line button . You will hear the dial tone.

• Enter the desired telephone number.

• Press the Line button when you want to terminate the call.

5.1.2 Call setup with dial preparation

• Enter the desired telephone number. An incorrect number can be corrected by means of the Mute button . When

you haven’t pressed a button for 10 seconds, the number you’ve already entered will disappear and the handset

returns to standby mode.

• Press the Line button . The number will be dialled automatically.

• Press the Line button when you want to terminate the call.

5.1.3 Redialling the last n

umber dialled

• Press the Line key .

•The Line/Charge indicator (LED) on the base unit will blink.

• You will hear the dial tone.

• Press the Redial key . The number you last called is dialled automatically.

5.1.4 Redial one of the last 3 n

umbers dialled

• Press the Redial key . The number you last called appears on the display. If you would like to dial one of the last

3 numbers dialled, press the Redial key a few times until the desired number appears on the display.

• Press the Line key .

•The number shown on the display is dialled automatically.

•After finishing your call, press the Line key to hang up.

5.2 INCOMING CALLS

•When a call comes in, the handset will start to ring. The LED on the base will blink.

• Press the Line button to answer the incoming call.

5.3 ACTIVATE/DEACTIVATE HANDS FREE FUNCTION

This function allows you to communicate without having to pick up the handset. When you are on the phone, press the

Hands free key to activate the hands free function.

Press the same button to deactivate the hands free function.

Note : When you are calling in hands free mode and you want to change the volume, press the Volume

button .

Attention !! When you use the hands free function for a long time, the batteries will be empty more

quickly !

5.4 PROGRAMMING MEMORY NUMBERS

You can program 10 indirect numbers (of max. 25 digits) in the phone’s memory.

• Press and hold the Memory button until the -icon appears on the display.

• Enter the telephone number you whish to store.

• Press the Memory button again to confirm.

• Enter the memory location (0-9) where you want to store the number.

• You will hear a confirmation tone and the -icon will disappear.

Remarks :

If you wish to insert a pause, press the Redial/Pause button on the location where you want a pause

of 3 sec.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Topcom butler 2900 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info