Bedienungsanleitung Topcom butler 2950 (Seite 7 von 80) (Deutsch, Englisch, Holländisch, Französisch, Spanisch)

298477

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

Topcom Butler 2950 7

Topcom Butler 2950

ENGLISH

5.1.3 Redialling the last number dialled

• Press the Line key .

•The Line/Charge indicator (LED) on the base unit will blink.

• You will hear the dial tone.

• Press the Redial key . The number you last called is dialled automatically.

5.1.4 Redial one of the last 5 n

umbers dialled

• Press the Redial key . The number you last called appears on the display. If you would like to dial one of the

last 5 numbers dialled, press the Redial key a few times until the desired number appears on the display.

• Press the Line key .

•The number shown on the display is dialled automatically.

•After finishing your call, press the Line key to hang up.

5.2 INCOMING CALLS

•When a call comes in, the handset will start to ring. The LED on the base will blink.

• Press the Line button to answer the incoming call.

5.3 ACTIVATE/DEACTIVATE HANDS FREE FUNCTION

This function allows you to communicate without having to pick up the handset. When you are on the phone, press the

Hands free key to activate the hands free function.

Press the same button to deactivate the hands free function.

Note : When you are calling in hands free mode and you want to change the volume, press the Volume

button .

Attention !! When you use the hands free function for a long time, the batteries will be empty more quickly!

5.4 PROGRAMMING MEMORY NUMBERS

You can program 10 indirect numbers (of max. 25 digits) in the phone’s memory.

• Press and hold the Memory button until the -icon appears on the display.

• Enter the telephone number you whish to store.

• Press the Memory button again to confirm.

• Enter the memory location (0-9) where you want to store the number.

• You will hear a confirmation tone and the -icon will disappear.

Remarks :

If you wish to insert a pause, press the Redial/Pause button on the location where you want a pause of 3

sec.

5.5 CALLING A MEMORY NUMBER

• Press the Memory button , followed by the number of the memory location (0-9).

• Press the Line button . The memory number will be dialled automatically.

• Press the Line button when you want to terminate the call.

5.6 MUTE FUNCTION

It is possible to deactivate the microphone during a conversation. Now you can speak openly without being heard by

your correspondent.

• Press the Mute button during a conversation. The microphone will be deactivated. The MUTE symbol .

appears on the display.

• Press the Mute button again when you want to continue the conversation.

5.7 SETTING THE VOLUME

During a conversation you can set the volume by pressing the Volume button . You can set the volume alternatively

in Hi, Medium and Low.

Note: The hands free receiver volume is also adjustable as above described!

HL_B2950_eur.book Page 7 Monday, March 29, 2004 4:51 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Topcom butler 2950 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info