1. GENERAL
The Butler 5070 is a DECT telephone which has the advantage to use all services that are offered by the
Euro-ISDN network.
You can subscribe up to 5 handsets on one base station and every handset can be subscribed on 5 dif-
ferent base stations.
Also handsets of other brands can be subscribed to the Butler 5070 base station, as long as they sup-
port the GAP standard. Important note: not all the functions of the Butler 5070 can be used if
you use a handset other then Butler 5070C.
2. INSTALLATION
2.1. Charger
Before you use the telephone for the first time, you must make sure the batteries are charged for 20
hours. If you don’t do this, the telephone will not function properly.
Installation of the charger:
- Plug one end of the adapter into a power outlet and the other end into the adapter jack on the side
of the charger.
2.2. Batteries in handset
- Open the battery compartment (see below).
- Put 3 batteries (AAA) in the battery compartment
- Close the battery compartment.
- Leave the handset on the charger for minimum 20 hours.
Battery indicator:
( ) The battery is fully charged.
( ) The battery is half drained (50%)
( ) The battery is low. When the battery is low, you will hear warning signals and the battery
symbol on the display will blink.
DC POWER
PLUG IN
