Bedienungsanleitung Topcom butler 5400 (Seite 14 von 112) (Deutsch, Englisch, Holländisch, Französisch, Spanisch)

298730

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

Topcom Butler 5400

14 Topcom Butler 5400

8 BASE SETTINGS

8.1 RINGTONE AND VOLUME

8.1.1 Ringtone

You can choose 5 different ringer melodies:

• From the standby screen, press MENU then scroll to Base settings and press OK.

• Press OK again to enter the Base Ringtone menu.

• Scroll or to the melody you want. During scrolling a sample is played. Press OK to select or BACK to

return to the previous menu.

• Press and hold BACK to return to standby.

8.1.2 Ringer volume

There are five base ringer volume levels and Off.

• From the standby screen, press MENU then scroll to Base settings and press OK.

• Scroll to Base Volume and press OK.

• The current setting is displayed. Press to increase or to decrease the volume. Press OK to confirm.

• Press and hold BACK to return to standby.

8.2 HANDSET PRIORITY

Normally, if you have more than one handset registered to your base, they all ring at the same time. However, you can

set one of them to ring before the others, so that calls can always be answered at one handset first.

• From the standby screen, press MENU then scroll to Base settings and press OK.

• Scroll to Handset Priority and press OK. Display highlights All Handsets. Press OK to select All Handsets

to make all handsets ring together.

• Scroll to Select Handset and press OK. Scroll or to the handset you want to ring first. Press OK.

• Scroll or to select the number of rings at the handset before the other handsets start ringing. Press OK

to confirm.

8.3 LINE SETTINGS

8.3.1 Flash time

• Press MENU then scroll to Base Settings and press OK. Scroll to Recall Mode and press OK.

• Press or to highlight Recall 1 for short flash time (100ms) or Recall 2 for long flash time (250ms) and

press OK to confirm.

8.4 SYSTEM PIN

The System PIN is used for registering and deregistering handsets and some other optional settings. The default

System PIN is 0000.

• Press MENU then scroll to Base Settings and press OK. Scroll to System Pin and press OK.

• Enter the current PIN (Original setting 0000) and press OK.

• Enter the new PIN, press OK and enter it again.

• Press OK to confirm.

8.5 SIM COUNTRY CODE SETTINGS

You can program the Butler 5400 how to convert telephone numbers stored on your sim card when copying them to

your handset phonebook memory (See § “4 Phonebook” ).

There are 3 rules how the convertion will be done:

1. If a number stored in the SIM card begins with '+' or '00', and the country code on the SIM number matches with the

programmed country code of the handset in this case, those caracters are replaced by the programmed national

code.

2. If a number stored in the SIM card begins with '+' or '00', and the country code on the SIM number does not match

with the programmed country code of the handset, in this case, '+' is replaced by international code.

3. If a number stored in the SIM card does not begin with '+' or '00', in this case, nothing is changed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Topcom butler 5400 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info