Bedienungsanleitung Topcom Butler Outdoor 2010 - TE 5800 (Seite 17 von 152) (Deutsch, Englisch, Holländisch, Französisch, Spanisch)

483917

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

Butler Outdoor 2010 - Twin - Triple Handset - settings and operation

ENGLISH

of the line being able to hear you. The mute key must be

pressed again to reactivate the microphone.

4.13 Pause key (dialling pause)

If you want to insert a dialling pause while dialling a telephone

number, press the pause key P for 3 seconds at the

appropriate point in the number until a P appears in the display.

If you then dial this number (or select it for redial), the dialling

pause (approx. 3 seconds) is automatically dialled too.

4.14 Finding the handset from the base station

(paging)

If you cannot find the handset, briefly press the paging key

on the base station. All handsets registered on the base station

ring which allows them to be located. Press any key on the handset

to stop it ringing.

4.15 Using the alphanumeric keypad

Use the alphanumeric keypad to enter a text. Press the

appropriate alphanumeric key to select a letter. For example, if you

press the ‘5’ numeric key, the letter ‘J’ appears in the display first.

Press the key repeatedly to enter other characters assigned to this

key.

Press the ‘2’ key once to select the letter ‘A’. If you want to enter

‘A’ and ‘B’ in succession, first press the ‘2’ key once to select the

letter ‘A’. Then wait for a second to move to the second character,

then press key ‘2’ twice to enter ‘B’. You can use the escape key

ESC to delete letters that have been entered incorrectly. The

character before the cursor is deleted. All characters in an entered

sequence can be deleted at once by pressing and holding the

escape key ESC for 2 seconds.

Use the left or right key to move the cursor. Use the

# key to toggle between upper and lower case letters.

4.16 Setting the ringer volume on the handset

You can set the ringer volume for incoming calls (internal or

external) to 6 levels (levels 1 to 5 and ‘OFF’).

If you select ‘OFF’, the symbol appears in the display. The

handset does not ring when there is an incoming call. level "5" is

the highest. (The default setting on the telephone is level "3".)

4.16.1

Setting the ringer volume for internal and external

calls (0-5)

1. Press .

2. Press or repeatedly, select ‘HS SETTINGS’.

3. Press to confirm.

4. Press or repeatedly, select ‘HANDSET TONES’.

5. Press to confirm.

6. Press or repeatedly, select ‘RING VOLUME’.

7. Press to confirm.

• The current volume is displayed and can be heard.

8. Press or

repeatedly to select the ringer volume

you want.

9. Press to confirm your selection or press ESC to

exit the menu without saving.

To turn off the handset ringer permanently, press and

hold for approx. 3 seconds. The symbol

appear in the display. To reactivate the ringer, press and

hold again for 3 seconds.

16 5

4 15

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Topcom Butler Outdoor 2010 - TE 5800 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info