Bedienungsanleitung Topcom cleo (Seite 23 von 35) (Deutsch, Englisch, Holländisch, Französisch)

299654

Zoom out

Zoom in

Vorherige Seite

1/35

Nächste Seite

Cleo

Saving Messages after Play Back

After you have played back your last recorded message, you will hear 2 beep tones

and the cassette tape will automatically rewind to the beginning. If you wish to save

the messages, press and hold the STOP button

(9) until the MSG indicator (8)

starts blinking. Your messages are now saved. New messages will be recorded after

the saved messages. The message counter will display the total number of new and

saved messages.

Erasing Messages

After play back of your last recorded message, you will hear 2 beep tones and the

tape will automatically rewind to the beginning. New messages will automatically

be recorded over old messages unless you press and hold the STOP button

(9).

See “Saving messages after play back” above.

REMOTE CONTROL

IMPOR TANT: Always call from a true touch tone telephone (DTMF) for remote oper-

ation of your unit. The decoder is available as an option.

Security Code

To operate your unit by remote control you first have to gain access to your unit by

using a Security Code. This unit is factory preset with code 2

Cleo

MEMO Recording

The memo function allows the user at the answering machine location to leave a

message on the machine for the next user.

1. Press and release the MEMO/FAST FORWARD button

(6). You will hear a

BEEP. The MSG indicator

(8) will light.

2. Start dictating your memo.

3. Press the STOP button

(9) to end the recording.

* A memo is counted as a message by the Message Counter

(24) and will be played

along with all ICMs recorded.

* A Memo Recording has no time limit but you should consider recording time left

for Incoming Messages.

Playing the Incoming Messages

The message counter will display the number of ICMs recorded up to a maximum of

9 though there may be more than 9 ICMs recorded. When the tape is full, the

answering machine will not answer any more calls.

1. Press and release the PLAYBACK/REWIND button

(7) .

2. Adjust VOLUME CONTROL

(27) for comfortable listening level.

3. After the last message has been played, your unit will sound 2 BEEPS and will

automatically rewind the microcassette tape to the beginning. All old messages

will be automatically erased when new messages are recorded unless they have

been SAVED (see “Saving incoming messages after play back”).

4. To pause during play back, press the STOP button

(9). To resume play back,

press the PLAYBACK/REWIND button

(7).

5. To rewind and review a message during play back, press and hold the PLAY-

BACK/REWIND button

(7). Release the PLAYBACK/REWIND button

(7) to resume normal play back.

6. To fast forward during play back, press and hold the MEMO/FAST FORWARD but-

ton

(6). Release the MEMO/FAST FORWARD button (6) to resume

normal play back.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Topcom cleo Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info