Bedienungsanleitung Topcom fidelity 142 (Seite 5 von 60) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

299678

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Topcom Fidelity 140 5

ENGLISH

5.2 Deactivating the microphone (mute)

It is possible to deactivate the microphone and speaker during a conversation by pressing the Erase/Mute button .

You can now talk freely without the caller hearing you. The mute icon appears on the display when the microphone

is deactivated. Press the Erase/Mute button again if you want to resume your conversation.

6 CALLER ID

6.1 General information

When you have a subscription to the Caller ID service from you telephone provider, the caller’s phone number will

appear on the display. Depending on the telephone network, the caller’s name will also be shown on the display. If your

telephone company doesn’t send the name, but you saved the telephone number with the name in a direct memory,

the programmed name will be shown on the display (name tagging function).

During an incoming call, the following information can appear on the display:

NUM. UNKNOWN

You have a subscription to the Caller ID service but the caller’s number is not available (for ex. international calls).

NUM. BLOCKED

You have a subscription to the Caller ID service but the caller’s number is a private number.

LONG DISTANCE

You have a subscription to the Caller ID service but the caller’s number is from a foreign country.

6.2 Call list

The Fidelity 140 has a Call List in which you can save at least 30 incoming telephone numbers with name. Every in-

coming number is saved in the Call List with indication of date and time.

In standby mode the number of new received calls is shown on the display.

6.2.1 Scr

olling through the Call List

You can scroll through the Call list with the Up or Down button.

When you have reached the beginning/end of the list, “------------” appears on the display. Every time a new call comes

in, is shown on the display. When you have received the call more than once, is displayed.

6.2.2 Erasing n

umbers from the Call List

a) Erasing one number

• Select the call you wish to erase with the Up or Down button.

• Press the Erase button once. “CLEAR?” appears on the display.

• Press the Erase button once again to confirm or the Up or Down button to scroll

through the rest of the Call List.

b) Erasing the entire Call List

• Enter the Call List, press and hold the Erase button until “CLEAR ALL?“ appears on the

display.

• Press the Erase button once again to confirm or use the Scroll switch to scroll

through the rest of the Call List.

6.2.3 Calling a n

umber from the Call List

• Select the desired telephone number with the Up or Down button.

•Pick up the handset, the number will be dialed automatically.

6.3 Voice mail

!!! This function only works if your telephone company sends the Voice Mail signals together with the

Caller ID information !!!

When the Fidelity 140 has received a voice mail message, the Voice Mail symbol appears on the display. As soon

as you have listened to the messages in the mailbox, the symbol disappears.

HL_fidelity140.book Page 5 Monday, June 16, 2003 12:16 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Topcom fidelity 142 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info