Bedienungsanleitung Topcom RC-6405 - Twintalker (Seite 7 von 124) (Alle Sprachen)

719691

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

• If you press the button while listening to a found CTCSS

code, the PMR will go back in stand-by mode on the channel with

the CTCSS code.

• If no CTCSS code is detected there is a chance that DCS is

selected by the user. In this case you can scan for the DCS code.

(section 13.10.3)

PTT

Twintalker RC-6405

13.10.3 Scanning for a DCS code

• Press the -button

seven times : "SCAN" and "DCS

00"

flashes on the display for the selected radio channel.

• Press the -button

or the -button

to start the

DCS scan.

Once there is a transmission on the channel, the DCS code (if

used) will be detected and

displayed.

If you press the button while listening to a found DCS code, the

PMR will go back in stand-by mode on the channel with the DCS code.

PTT

13.11 Call Tones

A call tone alerts others that

you want to start talking.

13.11.1 Setting the Call Tone

The Twintalker RC-6405 has 15 call tones.

• Press the - button

eight times, “C” is displayed and

the current call tone is flashing.

• Press the - button

or the - button

to change to

another Call Tone.

• Press the

PTT

- button

to confirm and return to stand-by

mode.

13.11.2

Sending a call Tone

Press the button

briefly. The call tone will be transmitted on the set channel.

13.11.3 Call tone reception type

• Press the -button

nine times.

• Press the -button

or -button

to select the call tone reception type.

1. Tone only

2. Tone + vibration

3. Vibration only

Press the

PTT

-button

to confirm and return to stand-by mode.

13.12 Roger Beep On/Off

After the

PTT

-button

is released, the unit will send out a roger beep to confirm that you have

stopped talking.

To set the Roger Beep.

• Press the - button

ten times. ‘rO’ will be displayed.

• Press button

to enable (ON) or button

to disable the Roger-

Beep (OFF).

• Press the

PTT

- button

to confirm your selection and return to the

standby mode.

13.13 Key-Tone On/Off

When a button is pressed, the unit will beep briefly.

To set the key-tone.

• Press

button

eleven times. ‘tO’ will be displayed.

• Press button

to enable (ON) or button

to disable the Key

Tones (OFF).

• Press the

PTT

- button

to confirm your selection and return to the.

standby mode.

13.14 Dual Channel Monitor function

In stand-by, the PMR is set on one channel with CT

CSS/DCS code. The PMR will only receive

signals transmitted on that channel with the CTCSS/DCS code.

Dual Channel Monitor (DCM) allows you to monitor a second channel with CTCSS/DCS code.

• Press the -button

twelve times,” DCM OFF" will

flash on the display.

• Press the

-button

or the -button

to change the

channel.

• Press the

-button

to confirm the channel selection

and go to CTCSS selection. (Press the

-button

again to go to DCS selection)

• Press the

-button

or the -button

to change

the CTCSS code or DCS code.

• Press the

PTT

-button

to confirm and return to stand-by

mode.

• To disable the function select "OFF" when selecting the

DCM channel.

When the Dual Channel Monitor function is activated, the PMR wil

l switch sequentially between

the standby channel + CTCSS/DCS code and the Dual Channel + CTCSS/DCS code.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Topcom RC-6405 - Twintalker Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info