Bedienungsanleitung Topcom Twintalker 9500 - RC 6406 (Seite 8 von 148) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

483958

Zoom out

Zoom in

Vorherige Seite

1/148

Nächste Seite

8 Twintalker 9500 Airsoft Edition

13.8 Monitor

You can use the monitor feature to check for weaker signals in the current

channel.

• Press the -button and -button simultaneously to

activate channel monitoring.

• Press the -button to stop channel monitoring.

13.9 VOX Selection

The PMR is capable of voice activated (VOX) transmission. In VOX

mode, the radio will transmit a signal when it is activated by your voice or

other sound around you. VOX operation is not recommended if you plan

to use your radio in a noisy or windy environment.

13.10 Channel Scan

Channel scan performs searches for active signals in an endless loop

from channel 1 to 8.

Once an active channel is found you have the option to search for the

CTCSS code or the DCS code that is set by the user who is broadcasting

on the channel.

13.10.1 Scanning for an active radio channel

Once an active channel is found, the scanning will stop and you can listen

to the transmission.

When the transmission on the found channel stops, the scanning will

resume automatically.

13.10.2 Scanning for a CTCSS code

When an active channel is found press the button to select the

found active channel. Now you have to option to search for the CTCSS/

DCS code that is used by the found user.

Once there is a transmission on the channel, the CTCSS code (if used)

will be detected and displayed.

During channel monitoring the receiver circuit in the

PMR will not listen to CTCSS or DCS codes.

VOX mode will be overrided when you press the -

button .

• Press the - button

four times, the

current VOX setting flashes on the display

and the VOX icon is displayed.

• Press the -button to set the VOX

sensitivity level between 1 and 3 (level 3 is

the most sensitive level).

• Press the button until ‘OFF’

appears on the display, to turn VOX OFF.

• Press the - button to confirm and

return to stand-by mode.

PTT

• Press the -button five times :

"SCAN" and the current channel flashes

on the display.

• Press the -button or the -

button to start the channel scan.

If you press the button while listening to a

found channel, the PMR will go back in stand-by mode

on the found channel.

• Press the -button six times :

"SCAN" and "CTCSS 00" flashes on the

display for the selected radio channel.

• Press the -button or the -

button to start the CTCSS scan.

• If you press the button while listening to a

found CTCSS code, the PMR will go back in stand-by

mode on the channel with the CTCSS code.

• If no CTCSS code is detected there is a chance that

DCS is selected by the user. In this case you can scan

for the DCS code. (section 13.10.3)

PTT

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Topcom Twintalker 9500 - RC 6406 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info