Bedienungsanleitung Toro Evolution Auxiliary Relay (Seite 2 von 2) (Englisch)

651164

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

is device complies with part 15 of the FCC rules. Operation is subject to the

following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that my cause undesired operation.

FCC Note: e manufacturer is not responsible for any radio or TV interference

caused by unauthorized modications to this equipment. Such modications could

void the user’s authority to operate the equipment.

Note: is equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to Part 15 of the FCC Rules. ese limits are

designed to provide reasonable protection against harmful interference in a residential

installation. is equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does harmful

interference to radio or television reception, which can be determined by turning the

equipment o and on, the user is encouraged to try to correct the interference by one

or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which

the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

e user may nd the following booklet prepared by the Federal Communications

Commission helpful:

“How To Identify and Resolve Radio-TV Interference Problems.” is booklet is

available from the U.S. Government Printing Oce, Washington, DC 20402, stock

# 004-000-00345-4.

is Class B digital apparatus complies with Canadian ICES-003. International: is

is a CISPR 22 Class B product.

8. If it does match, press .

If it does not match, change to NO, press , and repeat steps

3-8.

Getting to the Auxiliary Relay Menu

1. Press ADVANCED then .

2. Press to SCHEDULE DETAILS then press .

3. AUX 2 and AUX 3 are the schedules to control the

EVO-AR relays (for AUXILIARY, see note below).

4. Press to move to the schedule to adjust.

5. Press or to enter the selected AUX menu.

AUXILIARY allows the controller to control a wired device

such as a wired relay pump or fountain. AUX 2 and AUX 3

are for wireless devices connected to an EVO-AR.

The AUX Menu

Status

Enable or disable the AUX 2 or 3 schedule without having to

actually delete the schedule. For example, one might disable

backyard lights and/or fountain while one is on vacation.

1. Press to ENABLED eld.

2. Press or to enable or disable the schedule.

3. Press to commit the selection.

Active Days

Set the days that the AUX schedule will be active.

1. Press to ACTIVE DAYS. Press or .

2. Press or to move from day to day.

3. Press or to enable or disable a day.

(A is an “enabled” day.)

4. Press to commit the changes.

Start / End

Set the start and end times of the AUX 2/3 schedule. For a

residential transformer controlling lights, a start time and end time

of 7pm and 11pm (respectively) might be desirable.

To turn the schedule o, “OFF” is between 11AM and 12AM.)

1. Press to START.

2. Press or . e hour eld will be highlighted.

3. Press or to change the hour value.

4. Press to move to the next eld.

5. Press or to change the highlighted value.

6. Repeat steps 4 and 5 to adjust AM/PM.

7. Press to commit the changes.

is eld is display-only and shows the ID of the AUX device.

Erase Schedule

Erase the schedule of the AUX device. You will be prompted to

corm schedule deletion.

Manual Operation

It is possible to manually begin the AUX2 or AUX3 schedule from

the EVOLUTION® controller. e Auxiliary Relay must be enabled

and scheduled.

1. Press WATER NOW.

2. Press to select the enabled auxiliary schedule:

AUX 2 or AUX 3.

Press . e auxiliary system will turn on.

3. At the HOME screen, press to review how long the

auxiliary sytem will be active.

4. To stop an auxiliary schedule, press WATER OFF.

ZONE RUNTIMES

ZONE DETAILS

SCHEDULE STARTS

SENSORS

ADVANCED

→

SCHEDULE DETAILS

SCHEDULE A

SCHEDULE B

SCHEDULE C

AUXILIARY

SCHEDULE DETAILS

AUX 2

→

STATUS ENABLED

START 07:00PM

RUNTIME 00:05

ID 01 36 06

AUX 2

ACTIVE DAYS

→

S M T W T F S

- -

TODAY IS MONDAY

SCHEDULE

SCHEDULE A

ZONES

ALL ZONE TEST 02:00

WATER NOW

AUX 2

→

For more information about the EVO-AR, including support information, please point your browser to www.toro.com/evolution.

FCC Notice

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toro Evolution Auxiliary Relay Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info