Bedienungsanleitung Torqeedo TorqLink Throttle - 1976-00 (Seite 13 von 63) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Finnisch)

807538

Zoom out

Zoom in

Vorherige Seite

1/63

Nächste Seite

24 25

8.2 Language setting

You can change the language selected under Main menu Settings Language.

Both submenus are at the end of their respective lists to enable this setting to be changed

even if the language has been altered accidentally.

8.3 Maximum speed

You can set the maximum boat speed for the circular display in Speed mode on the boat.

You will ﬁnd the corresponding setting menu under:

Main menu Settings Display Speed

Remember that the speed displayed refers to travel over ground.

9. Operation

9.1 Setting off

- Remove and stow the charging cable, if connected.

- Put the throttle into neutral.

- Start the system by pressing the on/off switch.

- As soon as the neutral icon on the display turns white, the system is ready to use

Tip: Test the movement function before you cast off by accelerating slightly.

9.2 Charging

To charge your Torqeedo drive system, please switch it off at the throttle and plug in

the charger.

Before setting off, always ensure that the charging cable is unplugged and stowed safely.

If you are using a Torqeedo fast charger, you can set the maximum AC charging current

in the event that the land power installation is not adequately protected, for example.

You will ﬁnd the corresponding setting menu under: Main menu Settings Charging

Charging current.

9.3 Hydrogeneration

All Torqeedo Fixed Pod motors (FP) have the option to recover energy through the drive

system while sailing. This function is disabled by default. It can be activated as follows:

Main menu Hydrogeneration.

For further information about hydrogeneration, please see the operating instructions

for your motor.

9.4 TorqTrac

This throttle has a Bluetooth interface. This allows the Torqeedo TorqTrac app to be used

without any other accessories. Enable the Bluetooth transmission function (Main menu

Settings Bluetooth) and connect to your Torqeedo drive system through the app.

9.5 Wi-Fi

The Wi-Fi function is used to carry out software updates, but is not required for normal

operation of the throttle. It is therefore advisable to disable this function (Main menu

Settings Wi-Fi).

9.6 Troubleshooting

In the event of a warning or fault, messages are shown on the display consisting of

an icon and a fault text. The icon displayed indicates the component in question and in

some cases the problem.

The fault text provides a brief explanation of the problem and the restrictions resulting

from it.

Pressing the button displays information about troubleshooting and a fault code.

Pressing the button conﬁrms and clears the fault message.

All fault messages can be viewed at any time under: Main menu Message log.

If you are unable to rectify the fault with the aid of the information in the fault text or

the operating instructions for the component in question, please consult Torqeedo

Service or a service partner, citing the fault code.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Torqeedo TorqLink Throttle - 1976-00 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info