Bedienungsanleitung Toshiba 16N3AVP Series (Seite 4 von 24) (Deutsch, Englisch)

587672

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

5412 3

385(

5(6(7

Press : Move the louver in the

desired vertical direction.

Press : Swing the air automatically

and press again to stop.

For horizontal direction, adjust manually.

INDOOR UNIT DISPLAY

Hi POWER (Green)

FILTER (Orange)

PURE (Blue)

TIMER (Yellow)

OPERATION (Green)

RESET button

Infrared signal emitter

Memory and preset button (PRESET)

Start/Stop button

Temperature up/down and

Timer or clock up/down button (TEMP.)

Mode select button (MODE)

Swing louver button (SWING)

Fan speed button (FAN)

One Touch button (ONE-TOUCH)

Set louver button (FIX)

8 degree celcius operation button (8°C)*

Economy button (ECO)

High power button (Hi-POWER)

Plasma Air Puriﬁ er button (PURE)

Comfort sleep button (COMFORT SLEEP)

Power selection button (POWER-SEL)*

On timer button (ON)

Off timer button (OFF)

Setup button (SET)

Clear button (CLR)

Clock setup button (CLOCK)

Check button (CHECK)

[

Filter reset button (FILTER)

]

Reset button (RESET)

PREPARATION BEFORE USE

Preparing Filters

1. Open the air inlet grille and remove the air ﬁ lters.

2. Attach the ﬁ lters. (see detail in the accessory sheet).

AIRFLOW DIRECTION

Note:

• Do not move the louver manually by others.

• The louver may automation positioning by some operation mode.

REMOTE CONTROL

ONE-TOUCH

Press the “ONE-TOUCH” button for fully automated operation that is

customised to the typical consumer preferences in your region of the world.

The customised settings control temperature air ﬂ ow strength, air ﬂ ow

direction and other settings to provide you alternate contact with “ONE-

TOUCH” of the button. If you prefer other settings you can select from the

many other operating functions of your Toshiba unit.

Press

: Start the operation.

* These 2 functions cannot be activated by the remote controller provided in

carton, please contact your distributor or retailer for purchasing of optional

remote controller in order to activate such functions. Its service part no. is

43T66311 (Model: WH-TA01JE). Only when using a single split outdoor unit

is connected, WH-TA01JE can be used.

AUTOMATIC OPERATION

To automatically select cooling, heating, or fan only operation

1. Press

: Select A.

2. Press

: Set the desired temperature.

3. Press

: Select AUTO, LOW , LOW+ , MED ,

MED+ , HIGH , or Quiet .

COOLING / HEATING / FAN ONLY OPERATION

1. Press : Select Cool , Heat , or Fan only .

(Fan only operation is required optional remote controller)

2. Press : Set the desired temperature.

Cooling: Min. 17°C, Heating: Max. 30°C, Fan Only: No temperature

indication

3. Press

: Select AUTO, LOW , LOW+ , MED ,

MED+ , HIGH , or Quiet .

Note: QUIET is supper low fan speed for quiet operation.

When using a multi-system outdoor unit is connected, FAN ONLY

operation cannot be used.

DRY OPERATION (COOLING ONLY)

For dehumidiﬁ cation, a moderate cooling performance is controlled

automatically.

1. Press

: Select Dry .

2. Press : Set the desired temperature.

AIR PURIFYING OPERATION

During air conditioner operation

Press

to start and stop plasma air puriﬁ er and air ionizer

operation.

The plasma air puriﬁ er and air ionizer can be activated or deactivated during

air conditioner is stopped and the air ionizer starts in conjunction with plasma

air puriﬁ er operation.

Note: The FILTER indicator (orange) turns on after PURE operation is

performed for about 1000 hours.

Hi-POWER OPERATION

To automatically control room temperature and airﬂ ow for faster cooling or

heating operation (except in DRY and FAN ONLY mode)

Press

: Start and stop the operation.

ECO OPERATION

To automatically control room to save energy (except in DRY and FAN ONLY

mode)

Press

: Start and stop the operation.

Note: Cooling operation; the set temperature will increase automatically 1

degree/hour for 2 hours (maximum 2 degrees increase). For heating

operation the set temperature will decrease.

TEMPORARY OPERATION

In case of the misplaced or discharged remote control

• Pressing the RESET button, the unit can start or stop

without using the remote control.

• Operation mode is set on AUTOMATIC operation,

preset temperature is 25°C and fan operation is

automatic speed.

]

[

385(

5(6(7

Loading Batteries

1. Remove the battery cover.

2. Insert 2 new batteries (AAA type) following

the (+) and (–) positions.

Clock Setup

1. Push

by tip of the pencil.

2. Press

: adjust the time.

3. Press : Set the time.

Remote Control Reset

Press

for reset.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba 16N3AVP Series Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info