Bedienungsanleitung Toshiba 22DV555DG (Seite 53 von 64) (Englisch)

66272

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

PC connection

As PCs are sometimes supplied with a ‘conventional’ CRT monitor, you may need to adjust the display

settings of your PC’s graphics card, otherwise the pictures may not appear correctly. Switch on your PC (still

with your original monitor) - select ‘1360 x 768’ for the screen resolution, and select 60 Hz for the on-screen

refresh rate. Switch off your PC, then connect it to your LCD TV while both items are still switched off.

Use a PC-VGA cable (not supplied) to connect the LCD-Monitor

to your PC. Make the connections carefully so as not to break or

bend the contacts inside the plug.

Select PC input

Switch on the LCD-TV.

Select the PC input mode (see page 11).

Note:

If there is no video signal from the

computer when the unit is in PC

mode, “NO SIGNAL” will appear on

the TV screen.

Digital PC connection via HDMI input

is not supported.

If you try to connect your PC digitally

anyway, the TV-operation might

freeze. TV will stop to respond

properly on usercommands.

Countermeasure: Switch-off

your TV and disconnect from the

220~240V power-supply.

Disconnect the digital PC connection.

Now you may retry operating your TV.

If a digital PC connection does show

a picture, proper working is not

guaranteed. Digital PC connection is

not granted for this TV.

•

Description about the each setting option:

PICTURE Menu

BRIGHTNESS and CONTRAST: You can adjust

these according to your personal preferences.

HOR POSITION and VER POSITION: to adjust the

horizontal and vertical placing of the image.

PHASE and CLOCK: eliminates the horizontal

(PHASE) and vertical (CLOCK) interfering lines.

RED/GREEN/BLUE: influences the colour balance.

BACKLIGHT: Press ◀ or ▶ to adjust the level you

require.

WXGA INPUT: When you input an WXGA signal,

set this option to “ON”.

RESET: Press ENTER to reset BRIGHTNESS,

CONTRAST, RED, GREEN, BLUE and BACKLIGHT

to the factory preset values.

AUDIO Menu

BASS/TREBLE/BALANCE: Tone setting menu.

RESET: Press ENTER to reset BASS, TREBLE and

BALANCE to the factory preset values.

Example: Adjust the contrast.

During PC mode press MENU.

The Menu will appear on the screen.

BRIGHTNESS 25

CONTRAST 40

HOR POSITION 0

VER POSITION

PHASE 25

CLOCK

Select CONTRAST, then press ENTER. Press ◀ or ▶ to

adjust CONTRAST.

Press EXIT to return to the normal screen.

VGA cable

(not supplied)

Audio cable

(not supplied)

TV (Back side view)

to PC

AUDIO

input

Monitor Display modes

MODE Resolution V. Frequency H. Frequency Pixel Clock Frequency

VGA 640 x 480 60.000Hz 31.500kHz 25.200MHz

SVGA 800 x 600 60.317Hz 37.879kHz 40.000MHz

XGA 1024 x 768 60.004Hz 48.363kHz 65.000MHz

WXGA 1280 x 720 59.870Hz 47.776kHz 79.500MHz

WXGA 1280 x 768 59.939Hz 44.955kHz 74.175MHz

WXGA 1360 x 768 60.015Hz 47.712kHz 85.5000MHz

(according to Graphic card)

51Z0231A_ENG.indd 5351Z0231A_ENG.indd 53 9/16/08 3:29:19 PM9/16/08 3:29:19 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba 22DV555DG Seite 53

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info