Bedienungsanleitung Toshiba 24D3863 (Seite 10 von 36) (Englisch)

681881

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

English - 9 -

satellite search is performed some settings should be

made. Antenna Type menu will be displayed first. You

can select Antenna Type as Direct, Single Satellite

 or DiSEqC switch by using Left or Right

buttons. After selecting your antenna type press OK to

see the options to proceed. Continue, Transponder

list and  options will be available. You

can change the transponder and LNB settings using

the related menu options.

• Direct: If you have a single receiver and a direct

satellite dish, select this antenna type. Press OK to

       

screen and press OK to scan for services.

•    If you have multiple

receivers and a single satellite cable system, select

this antenna type. Press OK to continue. Configure

settings by following instructions on the next screen.

Press OK to scan for services.

• DiSEqC switch: If you have multiple satellite dishes

and a DiSEqC switch, select this antenna type.

Press OK      DiSEqC

options (if available) on the next screen. Press OK

button to scan the first satellite in the list.

Analogue: If Analogue broadcast search option is

turned on, the TV will search for analogue broadcasts

after other initial settings are completed.

After the initial settings are completed TV will start

to search for available broadcasts of the selected

broadcast types.

While the search continues current scan results will

be displayed at the bottom of the screen. After all the

available stations are stored, Channels menu will be

displayed. You can edit the channel list according to

your preferences using the Edit tab options or press

the Menu button to quit and watch TV.

While the search continues a message may appear,

asking whether you want to sort channels according

to the LCN(*). Select Yes and press OK to confirm

(*) LCN is the Logical Channel Number system that organizes

available broadcasts in accordance with a recognizable

channel number sequence (if available).

Note: Do not turn off the TV while initializing first time

installation. Note that, some options may not be available

depending on the country selection.



You can connect 2.5” and 3.5” inch (HDD with external power

supply) external hard disk drives or USB memory stick to your

TV by using the USB inputs of the TV.

Back up the files on your storage devices

before connecting them to the TV. Manufacturer will

not be responsible for any file damage or data loss.

Certain types of USB devices (e.g. MP3 Players)

or USB hard disk drives/memory sticks may not be

compatible with this TV. The TV supports FAT32 and

NTFS disk formatting but recording will not be available

with NTFS formatted disks.

While formatting USB hard drives which have

more than 1TB (Tera Byte) storage space you may

experience some problems in the formatting process.

Wait a little while before each plugging and unplugging

as the player may still be reading files. Failure to do

so may cause physical damage to the USB player

and the USB device itself. Do not pull out your drive

while playing a file.

You can use USB hubs with your TV’s USB inputs.

External power supplied USB hubs are recommended

in such a case.

It is recommended to use the TV’s USB input(s)

directly, if you are going to connect a USB hard disk.

Note: When viewing image files the Media Browser menu

can only display 1000 image files stored on the connected

USB device.

USB Recording

Recording a Programme

 When using a new USB hard disk

drive, it is recommended that you first format the

disk using your TV’s Format Disk option in the

TV>Recordings>Settings menu.

To record a programme, you should first connect a USB

disk to your TV while the TV is switched off. You should

then switch on the TV to enable the recording feature.

To use recording your USB drive should have 2 GB free

space and be USB 2.0 compatible. If the USB drive

is not compatible an error message will be displayed.

To record long duration programmes such as movies, it

is recommended to use USB Hard disk drives (HDD’s).

Recorded programmes are saved into the connected

USB disk. If desired, you can store/copy recordings

onto a computer; however, these files will not be

available to be played on a computer. You can play

the recordings only via your TV.

Lip Sync delay may occur during the timeshifting. Radio

record is supported. The TV can record programmes

up to ten hours.

Recorded programmes are split into 4GB partitions.

If the writing speed of the connected USB disk is not

sufficient, the recording may fail and the timeshifting

feature may not be available.

It is recommended to use USB hard disk drives for

recording HD programmes.

Do not pull out the USB/HDD during a recording. This

may harm the connected USB/HDD.

If the AC cord is unplugged while there is an active

USB-recording timer setting, it will be cancelled.

Multipartition support is available. A maximum of two

different partitions are supported. The first partition

of the USB disk is used for USB Recording ready

features. It also must be formatted as the primary

partition to be used for the USB Recording ready

features.

Toshiba 24D3863 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Toshiba 24D3863

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info