Bedienungsanleitung Toshiba 24W1764 (Seite 13 von 31) (Englisch)

681964

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

English - 12 -

Switching On/Off

To Switch the TV On

Connect the power cord to a power source such

as a wall socket (220-240V AC, 50 Hz).

To switch on the TV from standby mode either:

• Press the Standby button, Programme +/- or

a numeric button on the remote control.

• Press the side function switch on the TV until

the TV comes on from standby.

To Switch the TV Off

Press the Standby button on the remote control

or press the side function switch on the TV until

the TV switches into standby mode.

To power down the TV completely, unplug the

power cord from the mains socket.

Note: When the TV is switched into standby mode, the

standby LED can blink to indicate that features such as

Standby Search, Over Air Download or Timer is active.

The LED can also blink when you switch on the TV from

standby mode.

First Time Installation

When turned on for the rst time, the language

selection screen is displayed. Select the desired

language and press OK.

On the next screen, set your preferences using

the directional buttons.

Note: Depending on the Country selection you may be

asked to set and conrm a PIN at this point. The selected

PIN cannot be 0000. You have to enter it if you are asked

to enter a PIN for any menu operation later.

About Selecting Broadcast Type

Digital Aerial: If Digital Aerial broadcast search

option is turned on, the TV will search for digital

terrestrial broadcasts after other initial settings

are completed.

Digital Cable: If Digital Cable broadcast search

option is turned on, the TV will search for digital

cable broadcasts after other initial settings are

completed. According to your other preferences

a conrmation message may be displayed before

starting to search. Select YES and press OK to

proceed. To cancel operation, select NO and

press OK. You can select Network or set values

such as Frequency, Network ID and Search

Step. When nished, press OK button.

Note: Searching duration will change depending on the

selected Search Step.

Satellite(**): If Satellite broadcast search

option is turned on, the TV will search for digital

satellite broadcasts after other initial settings are

completed. Before satellite search is performed

some settings should be made. Antenna Type

menu will be displayed first. You can select

Antenna Type as Direct, Single Satellite Cable

or DiSEqC switch by using “ ” or “ ” buttons.

• Direct: If you have a single receiver and a direct

satellite dish, select this antenna type. Press OK

to continue. Select an available satellite on the

next screen and press OK to scan for services.

• Single Satellite Cable: If you have multiple

receivers and a single satellite cable system,

select this antenna type. Press OK to continue.

Congure settings by following instructions on

the next screen. Press OK to scan for services.

• DiSEqC switch: If you have multiple satellite

dishes and a DiSEqC switch, select this

antenna type. Press OK to continue. You can

set four DiSEqC options (if available) on the

next screen. Press OK button to scan the rst

satellite in the list.

Analogue: If Analogue broadcast search

option is turned on, the TV will search for

analogue broadcasts after other initial settings

are completed.

Additionally you can set a broadcast type as your

favourite one. Priority will be given to the selected

broadcast type during the search process and

the channels of it will be listed on the top of

the Channel List. When nished, press OK to

continue.

You can activate Store Mode option at this point.

This option will congure your TV’s settings for

store environment and depending on the TV

model being used, the supported features of it

may be displayed on the top of the screen as

an info banner. This option is intended only for

store use. It is recommended to select Home

Mode for home use. This option will be available

in System>Settings>More menu and can be

turned off/on later.

Press OK button on the remote control to

continue.After the initial settings are completed

TV will start to search for available broadcasts

of the selected broadcast types.

After all the available stations are stored, scan

results will be displayed. Press OK to continue.

The Edit Channel List menu will be displayed

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba 24W1764 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Toshiba 24W1764

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info