Bedienungsanleitung Toshiba 24WA2B63DA (Seite 13 von 35) (Englisch)

754522

Zoom out

Zoom in

Vorherige Seite

1/35

Nächste Seite

English - 12 -

later using the Settings>Device Preferences>Usage

& Diagnostics menu on the Home Screen.

Information on Google services and some features of

-

al results for Assistant by choosing the related option

when prompted. Press OK consecutively to proceed.

8. Country

In the next step select your Country from the list and

press OK to continue.

9. Password

Depending on the country selection you made in the



OK to proceed. The selected

PIN cannot be 0000. This PIN will be required in order

to access some menus, contents or to release locked

channels, sources etc. You will have to enter it if you

are asked to enter a PIN for any menu operation later.

10. Select TV Mode

In the following step of the initial setup, you can set

Home or as Store.

Store 

environment. This option is intended only for store

use. It is recommended to select Home for home use.

11. Chromecast built-in always available

Select your chromecast availability preference. If set as

On

and allow Google Assistant and other services to wake



󰀨

12. Tuner Mode

Note: If you don’t want to perform a tuner scan, select one of

the available options anyway. You can skip the scan at some

later stage of the installation wizard. If you skip this step you

can perform a channel search later using the related Channels

menu options.

The next step is the selection of the tuner mode. Select



function. Antenna, Cable and Satellite options are

available. Highlight the option that corresponds to

your environment and press OK or Right directional

button to proceed.

Antenna

If Antenna 

digital terrestrial and analogue broadcasts. On the next

screen highlight Scan option and press OK to start

the search or select Skip Scan to continue without

performing a search.

Cable

If Cable        

digital cable and analogue broadcasts. If any, available

operator options will be listed on the Select Operator

screen. Otherwise this step will be skipped. You

can select only one operator from the list. Highlight

the desired operator and press OK or the Right

directional button to proceed. On the next screen

select Scan option to start a search or select Skip

Scan to continue without performing a search. If Scan

       

next. Scan Mode, Frequency(KHz), Modulation,

Symbol Rate(Ksym/s), Network ID options may need

to be set. To perform a full scan set the Scan Mode as

Full/Advance if available. Depending on the selected

operator and/or Scan Mode some options may not be

available to be set.

Once you are done with setting available options,

press the Right

will start to search available broadcasts.

Satellite

If Satellite option is selected, Satellite Type screen

will be displayed next. Preferred Satellite and General

Satellite options will be available. Select one and press

OK to proceed.

Note: Preferred Satellite and General Satellite options may

not be available depending on the selected country. In this case

the DVBS Conguration Setting screen will be displayed

after selecting the tuner mode as Satellite.

If Preferred Satellite option is selected, next screen

will be Select Operator screen. You can select only

one operator from the list. Highlight the desired

operator and press OK or the Right directional button

to proceed. Some of the following options may be

preset depending on the selected operator in this

step. Check the parameters before proceeding and

adjust if necessary.

 screen will be displayed

next. First Antenna type(*) should be set. Universal,

Single Cable and Jess Singlecable options are

available. Set the Antenna Type as Universal for

Direct and DiSEqC satellite systems. If you set the

antenna type as Universal, press the Right directional

button to proceed to the next step. If the antenna

type is set as Single Cable or Jess Singlecable,

there will be three more additional options on the

  screen: Tuner, Band

frequency and .  option

will be available if the Band frequency is set as User

. Set these options if available and press the

Right directional button to proceed.

(*) This option may be named as Satellite type depending on

the country selection.

After the parameters on the  

Setting screen are configured according to your

environment the next step may be Select Satellite

󰀨

depending on the selected antenna type and operator

in the previous steps. Highlight the desired satellite

option and press OK to set the parameters(*). The

Satellite Status       

set as On

Toshiba 24WA2B63DA Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Toshiba 24WA2B63DA

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info