Bedienungsanleitung Toshiba 28D3863 (Seite 4 von 37) (Englisch)

681886

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

English - 3 -



If the TV does not receive any input signal (e.g. from

an aerial or HDMI source) for 3 minutes, it will go

into standby. When you next switch-on, the following

message will be displayed: “



” Press OK to continue.

The Auto TV OFF option(in the Settings>System

>More menu) could have been set to a value between

1 and 8 hours by default. If this setting is not set as Off

and the TV has been left on and not been operated

during the set time, it will switch into standby mode

after the set time has expired. When you next switch-on

the TV, the following message will be displayed. “TV



” Press OK

to continue. Before the TV switches into standby mode

a dialogue window will be displayed. If you do not

press any button the TV will switch into the standby

mode after a waiting period of about 5 minutes. You

can highlight Yes and press OK to switch the TV into

standby mode immediately. If you highlight  and

press OK, the TV will remain on. You can also choose

to cancel the Auto TV OFF function from this dialogue.

Highlight  and press OK, the TV will remain on

and the function will be cancelled. You can enable this

function again by changing the setting of the Auto TV

OFF option from the Settings>System>More menu.

TV Control Switch & Operation

 Up direction

 Down direction

        



The Control button allows you to control the Volume

/ Programme / Source and Standby-On functions of

the TV.

To change volume: Increase the volume by pushing

the button up. Decrease the volume by pushing the

button down.

To change channel: Press the middle of the button

in, the information banner will appear on the screen.

Scroll through the stored channels by pushing the

button up or down.

To change source: Press the middle of the button in

twice(for the second time in total), the source list will

appear on the screen. Scroll through the available

sources by pushing the button up or down.

To turn the TV off: Press the middle of the button in

and hold it down for a few seconds, the TV will turn

into standby mode.

To turn on the TV: Press the middle of the button in,

the TV will turn on.



• If you turn the TV off, this cycle starts again beginning

with the volume setting.

• Main menu OSD cannot be displayed via control

button.

Operation with the Remote Control

Press the Menu button on your remote control to

display main menu. Use the directional buttons and

OK button to navigate and set. Press 

or Menu button to quit a menu screen.

Input Selection

Once you have connected external systems to your

TV, you can switch to different input sources. Press the

Source button on your remote control consecutively

to select the different sources.

Changing Channels and Volume

You can change the channel and adjust the volume

by using the Programme and  buttons

on the remote.

Using Main TV Menu

When the Menu button is pressed, the main TV menu

will appear at the bottom of the screen. You can

navigate through the menu items using the directional

buttons on the remote. To select an item or see the

sub-menu options of the highlighted menu press OK

button. When you highlight a menu option some of the

sub-menu items of this menu may appear on the upper

side of the menu bar for quick access. To use a quick

access item highlight it, press OK and set as desired

using the Left/Right directional buttons. When finished

press OK or  button to exit.

Press Exit button to close the main menu.

Home

When main menu is opened Home menu bar will

be highlighted. The content of the Home menu can

be customised by adding options from other menus.

Just highlight an option and press the Down direction

button on the remote. If you see Add to Home option

you can add it to the Home menu. Same way you can

delete or change the position of any item in the Home

menu. Press the Down direction button and select the

delete or move icon and press OK. In order to move

a menu item use the Right and Left direction buttons

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba 28D3863 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Toshiba 28D3863

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info