Bedienungsanleitung Toshiba 32LA2063DA (Seite 17 von 35) (Englisch)

754514

Zoom out

Zoom in

Vorherige Seite

1/35

Nächste Seite

English - 16 -

cancel the scan. The channels that have already been

found will be stored in the channel list.

Update Scan: Search for updates. Previously added

channels will not be deleted, but any newly found

channels will be stored in the channel list.

Analogue Manual Scan: Start a manual scan for

analogue channels. Enter the Start Frequency and

then select Scan Up or Scan Down. When a channel

is found the scan will be completed and the found

channel will be stored in the channel list.

Single RF Scan: Select the RF Channel by using

the Right/Left directional buttons. Signal Level and

Signal Quality of the selected channel will be shown.

Press OK to start scan on the selected RF channel.

The found channels will be stored in the channel list.

Manual Service Update: Start a service update

manually.

LCN: Set your preference for LCN. LCN is the Logical

Channel Number system that organizes available

broadcasts in accordance with a recognizable channel



Channel Scan Type: Set your scan type preference.

Channel Store Type: Set your store type preference.

Favourite Network Select: Select your favourite

network. This menu option will be active, if more than

only one network is available.

Channel Skip: Set channels to be skipped when

switching the channels via Programme +/- buttons

on the remote. Highlight the desired channel/s on the

list and press OK to select/unselect.

Channel Sort: Replace the positions of the two

selected channels in the channel list. Highlight the

desired channels on the list and press OK to select.

When the second channel is selected, the position of

this channel will be replaced with the position of the



Channel Move: Move a channel to the position of

another channel. Highlight the channel you want to

move and press OK to select. Then do the same for a

second channel. When the second channel is selected,



of that channel.

Channel Edit: Edit channels in the channel list. Edit the

name and channel number of the selected channel and

display Network Name, Frequency, Color System

and Sound System information related to that channel

if available. Depending on the channel other options

may also be editable. You can press the Blue button

to delete the highlighted channel.

Analogue Channel Fine-tune: Fine-tune an analogue

channel. A list of available analogue channels will be

displayed. Select the desired one from the list and

press OK button. Then change the frequency of the

channel by pressing Left/Right directional buttons.

Press OK to store the new frequency for that channel.

Press Back to cancel. This item may not be visible,

depending on whether or not the last watched channel

was analogue.

Clear Channel List: Delete all channels stored in the

channel list of the selected channel installation mode.



OK and press OK button to proceed. Highlight Cancel

and press OK to cancel.

Channel Installation Mode - Cable

Automatic Channel Search: Start a scan for analogue

and digital cable channels. If available, operator op-

tions will be listed. Select the desired one and press

OK. Scan Mode, Channel Scan Type, Frequency

and Network ID options may be available. The options

may vary depending on the operator and the Scan

Mode selections. Set the Scan Mode as Full if you

don’t know how to set up other options. Highlight Scan

and press OK to start the scan. You can press the Back

button to cancel the scan. The channels that have

already been found will be stored in the channel list.

Single RF Scan: Enter the Frequency value. Signal

Level and Signal Quality of the selected Frequency

will be shown. Highlight the Scan option and press

OK to start scan. The found channels will be stored

in the channel list.

LCN: Set your preference for LCN. LCN is the Logical

Channel Number system that organizes available

broadcasts in accordance with a recognizable channel



Channel Scan Type: Set your scan type preference.

Channel Store Type: Set your store type preference.

Favourite Network Select: Select your favourite

network. This menu option will be active, if more than

only one network is available.

Channel Skip: Set channels to be skipped when

switching the channels via Programme +/- buttons

on the remote. Highlight the desired channel/s on the

list and press OK to select/unselect.

Channel Sort: Replace the positions of the two

selected channels in the channel list. Highlight the

desired channels on the list and press OK to select.

When the second channel is selected, the position of

this channel will be replaced with the position of the



Channel Move: Move a channel to the position of

another channel. Highlight the channel you want to

move and press OK to select. Then do the same for a

second channel. When the second channel is selected,



of that channel.

Channel Edit: Edit channels in the channel list. Edit

the name and channel number of the selected channel

and display Network Name, Frequency, Color Sys-

Toshiba 32LA2063DA Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info