Bedienungsanleitung Toshiba 32TL966 (Seite 30 von 84) (Englisch)

475360

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

CONTROLS AND FEATURES

English

Incoming video signals can either be in 2D or 3D format. A 2D

signal can be viewed in either 2D or 3D, and 3D can be viewed in

either 2D or 3D. If the TV can detect the fact that a signal is 3D, it

can change to 3D mode automatically – see “Setting the auto

start mode” (on page 32). Otherwise you can change the viewing

mode using the 3D button. Finally, the format of the 3D signal

can be either Side by Side (SBS) or Top and Bottom (TB). You may

have to choose the correct format if the TV can not detect it

automatically – see “Switching display mode or selecting 3D

format”.

Moreover, you can change 2D images to 3D images by pressing

the 3D button when viewing in 2D.

NOTE:

• When 3D format signal is not received, display mode is not

switched to 3D.

• If appropriate mode and format are not selected, 3D image

is not correctly displayed.

• There will be restrictions on the Picture Size settings for 3D

Mode and 2D Mode.

• There are individual differences in perception of 3D images.

• When viewing 3D images, wear the 3D Glasses.

• The 2D to 3D conversion function is activated and

controlled by you according to your personal preferences.

• The 2D to 3D conversion function is meant for enjoyment of

2D home video, and other 2D content you create, in 3D

according to your personal preferences.

• The 2D to 3D conversion function is not intended for use

with pre-recorded 2D copyrighted content owned by a

third-party unless the copyright owner has given direct or

indirect permission, or unless applicable law permits such

use.

There are four modes for watching TV.

3D format select:

If a right and left images are same in Native mode, select SBS.

If a top and bottom images are same in Native mode, select

TB. 3D formats are the following.

* This format cannot be selected manually.

The 3D button's operation:

The behaviour of 3D when viewing in Native mode is different

depending on the input mode.

Depending on the input mode, the screen for selecting 2D or

3D is displayed or the display mode switches between 2D and

3D.

To switch to 3D mode:

•Set Preferences / 3D Setup / 3D Auto Start to 3D.

•Press 3D while viewing 2D mode or Native mode.

* Correct 3D image

Viewing 3D images Switching display mode or selecting 3D

format

Mode Description

3D Displays 3D images.

2D Changes 3D images to 2D.

2D to 3D Changes 2D images to 3D.

Native Displays a received signal format as it is.

3D format Description

Side by

Side (SBS)

Images for the left and right eyes

are positioned side-by-side.

Top and

Bottom

(TB)

Images for the left and right eyes

are positioned at the top and

bottom of the screen.

Frame

Packing

(FP) *

Image for the left and right eyes for

two frames are positioned at the

top and bottom of the screen.

Trigger of Switching

Display Mode

Press 3D button

Input Signal

Type Additional

Information

Format Source

Signal

Select

2D to 3D

Format

Signal

With 3D

Auto Detect

Information

SBS

Without 3D

Auto Detect

Information

SBS

2D Format Signal

3D 3D

3D 3D 3D 3D

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba 32TL966 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Toshiba 32TL966

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info