Bedienungsanleitung Toshiba 37UL863 (Seite 36 von 102) (Englisch)

647007

Zoom out

Zoom in

Vorherige Seite

1/102

Nächste Seite

CONTROLS AND FEATURES

English

Black/White Level increases the strength of dark areas of the

picture to improve the definition.

a In the Advanced Picture Settings menu, press B or

b to select Black/White Level.

b Press C or c to adjust the level. The effect depends on

the broadcast and is most noticeable on dark colours.

The static gamma feature allows you to adjust the levels of black

in the picture.

a In the Advanced Picture Settings menu, press B or

b to select Static Gamma.

b Press C or c to adjust the level.

When watching a DVD, the compression may cause some words

or picture elements to become distorted or pixelated.

Using the MPEG NR feature reduces this effect by smoothing out

the edges.

a In the Advanced Picture Settings menu, press B or

b to select Noise Reduction and press OK.

b Press b to select MPEG NR.

c Press C or c to select Low, Middle, High or Off to suit

your preference.

DNR allows you to “soften” the screen representation of a weak

signal to reduce the noise effect.

a Select DNR from the Noise Reduction menu.

b Press C or c to select Low, Middle, High, Auto or Off.

The differences may not always be noticeable (for the

best result use lower settings as picture quality can be

lost if the setting is too high).

The Resolution+ feature allows you to adjust the clarity levels

for your desired picture settings.

a In the Advanced Picture Settings menu, press B or

b to select Resolution+ and press OK.

b In the Resolution+ field, select Auto.

c Press B or b to highlight Level and press C or c to

adjust the level.

NOTE:

• This feature may not work properly depending on the

content.

• Adjustable range varies according to the Picture Mode you

set.

• Noise may appear in the picture depending on the device

connected to the TV (e.g. a device with a specific enhancer

function).

This feature will reduce picture blur without decreasing image

brightness or adding flicker.

a In the Advanced Picture Settings menu, press B or

b to select Active Vision M100.

b Press C or c to select Smooth, Standard or Off.

NOTE: When Picture Mode is set to Game, this feature will be

grayed out and automatically set to Off.

This feature is to set the range of the adjustment of movement in

the double-scan processing. If you feel uncomfortable in motion

picture, select Standard.

a In the Advanced Picture Settings menu, press B or

b to select Motion Detection Range.

b Press C or c to select Wide or Standard.

Wide — Double-scan effect for higher-speed motion

picture

Standard — Stabilized double-scan effect

NOTE: When Active Vision M100 is set to Off, this feature will

be grayed out.

Black/White Level

Static Gamma

MPEG NR – Noise Reduction

DNR – Digital Noise Reduction

Noise Reduction

DNR

MPEG NR

Low

Auto

Resolution+

Active Vision M100

Motion Detection Range

Resolution+

Level

Resolution+

Auto

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba 37UL863 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info