Bedienungsanleitung Toshiba 40D1334 (Seite 47 von 59) (Englisch)

645389

Zoom out

Zoom in

Vorherige Seite

1/59

Nächste Seite

English

HDMI CEC Menus

By activating the Enable HDMI CEC Control feature in the HDMI CEC Control Setup menu, individual HDMI-

LINK features can then be activated.

One Touch Play

The function of HDMI CEC will automatically

power on the television that was in standby mode

and switch the television’s input source to the

port connected with the audio/video equipment

by powering-on or playing from the audio/video

equipment.

NOTE: This feature is dependent on the connected

equipment and television setting.

System Standby

This feature automatically switches the connected

equipment into standby when the television goes

into standby and conversely for the television to

switch into standby when connected equipment goes

into standby. It is selected in the HDMI CEC Control

Setup menu.

NOTE: This feature is dependent on the connected

equipment and television setting.

System Audio Control

Using the Speaker Preference feature allows the

television’s remote control to adjust the volume or

mute the sound of the speakers connected to the

television via an AV amplifier.

Ensure that the connected AV amplifier and HDMI

CEC equipment are selected in the input source

selection and that the Initial Speaker Setting is set

to Amplifier in the HDMI CEC Control Setup menu.

NOTE: When the AV Amplifier is switched on,

its input source changed or the volume

adjusted, the sound will be output from the

AV Amplifier’s speakers even if TV speakers

has been selected. Turn the television off

then on again to output the sound from the

TV’s speakers.

The full function may not work and is dependent on

the amplifier being used.

HDMI CEC Control Setup

This feature uses CEC (Consumer Electronics

Control) technology, and allows the control of

Toshiba HDMI CEC compatible equipment from the

television’s remote control.

NOTE: Not all Toshiba products currently support

HDMI CEC.

Equipment Control

The HDMI CEC mode on the television’s remote

control allows the control of connected HDMI CEC

equipment being watched. To control the HDMI CEC

input source, first select the equipment with HDMI

CEC input source selection, then switch the mode

on the remote control to HDMI CEC and press any

buttons.

The available functions are dependent on the

equipment connected. Not all the remote control

keys may be available. Please refer to the operation

manual for each piece of equipment connected.

Select HDMI CEC Device

Press . A list appears on screen showing

modes and all stored external equipment.

The HDMI-CEC icon appears automatically after

detected with HDMI CEC compatible equipment.



shown with the HDMI-CEC icon.



appears showing all connected HDMI CEC

equipment.

HDMI

CEC equipment, and then press

to select.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba 40D1334 Seite 47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info