Bedienungsanleitung Toshiba 40L6363 (Seite 69 von 94) (Englisch)

560903

Zoom out

Zoom in

Vorherige Seite

1/94

Nächste Seite

English

CONTROLS AND FEATURES

e Press B / b to go through the list adding the

details of the On Timer by using the number

buttons and

C / c to make selections.

Power On Time (only for DTV Clock On mode):

Set the time you prefer with the number buttons.

Repeat (only for DTV Clock On mode): Select the

desired On Timer operation (Once, Every Day,

Mon-Fri, Mon-Sat, Sat-Sun).

Input: Select a video input source (ATV, DTV Ant,

EXT 1, EXT 2, HDMI 1, HDMI 2, HDMI 3, HDMI 4

or PC).

Channel: Set the channel that will be tuned when

the television turns on.

NOTE: When an external input is selected in the

Input field, a channel cannot be selected.

Volume: Set the volume that will be applied when

the television turns on.

Time until Power On (only for DTV Clock Off

mode): Set the amount of time from now until the

TV turns on using the number buttons (maximum

of 12 hours).

f Press B / b to highlight Done and press OK.

To cancel the On Timer:

a In the On Timer menu, select Enable On Timer.

b Press C / c to select Off.

c Press B / b to highlight Done and press OK.

The television can be set to turn itself Off after a certain

length of time.

a Press and B / b to highlight Timers icon.

b Press c and B / b to highlight Sleep Timer and

press OK.

c Use the number buttons to set the desired time.

For example, to switch the television off in one and

a half hours enter 01:30, or press

c / C to

increase/decrease in steps of 10 minutes.

(Maximum time setting is 12 hours)

d Press EXIT to finish.

e To cancel the Sleep Timer, enter all zeros for the

above setting.

Energy Saving Settings

The TV will automatically turn itself off (Standby) after 4

hours, if you do not operate the TV either from the remote

control or the TV control panel.

a Press and B / b to highlight Options icon.

b Press c and B / b to select Power Management

and press OK.

c Press B / b to select Automatic Power Down.

d Press c and B / b to select On or Off and press

OK.

NOTE:

• This feature is set to On when Location is set to Home.

• 1 minute before switching to Standby, a Warning

message will appear.

• When the following features are set, the feature that is

set for the nearest time will function.

- Automatic Power Down

- Sleep Timer

- Auto shutdown after 1 hour of inactivity (after power on

by On Timer)

- No signal auto power off (after 15 minute of no signal)

The TV will automatically turn itself off after 15 minutes

when no signal is detected. You can change the setting to

Off for the following purposes:

• Low signal strength of analogue channel (no signal

detection)

• Only Audio L/R is connected to external input to listen to

music through the TV speakers.

a In the Power Management menu, press B / b to

select No Signal Power Down.

b Press c and B / b to select the item you want to

change and press

c and B / b to select On or

Off.

NOTE:

• Default setting is all On.

• A warning message will appear 1 minute before turning

off.

Sleep Timer

Automatic Power Down

No Signal Power Down

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba 40L6363 Seite 69

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Toshiba 40L6363

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info