Bedienungsanleitung Toshiba 40RL933G (Seite 46 von 82) (Englisch)

475368

Zoom out

Zoom in

Vorherige Seite

1/82

Nächste Seite

CONTROLS AND FEATURES

English

To format a USB HDD

a In the Recording Setup screen, press B or b to select

Format Device and press OK.

b Press C or c to select Yes in the confirmation window

that will appear and press OK. Formatting will start.

Wait until formatting ends.

NOTE:

• If the USB HDD is separated several partitions by PC and

multiple Partition appear on the Device List screen, press B

or b to select the Partition you want to format.

• When the USB HDD (or Partition) is formatted, all the data

stored on the USB HDD (or Partition) will be deleted.

If programmed recording is not performed correctly or some

other error occurs, you can check the error content using

Recording Information. Up to 64 Recording Information

entries will be recorded and when the maximum is exceeded,

entries will be deleted starting from the oldest. You can delete

Recording Information after you have checked it.

a Press QUICK to open the Quick Menu.

b Press B or b to select Recording Information and

press OK. The Recording Information screen will

appear.

The recorded Recording Information list will appear.

(Yellow) icon will appear next to unread

Recording Information.

To check the content of Recording Information

a In the Recording Information screen, press B or b to

select the title you want to display.

b Press OK. The content of Recording Information will

appear.

Display Example

When you have checked the content, press BACK. The

screen will return to the previous screen.

To delete Reclording Information

a In the Recording Information screen, press B or b to

select the Recording Information you want to delete

and press OK.

b Press the RED button.

Select Yes in the confirmation window that will

appear and press OK.

The selected Recording Information will be deleted.

If scheduled time slots are next to each other and there is

more than one minute between the end time of the first

schedule and the start time of the next schedule,

programmed recording will be performed correctly.

• When Start Padding Time and End Padding Time are set

(see page 45), the start time and end time will be the time

plus the additional minutes.

If scheduling times overlap, priority will be given to the

programmed recording which starts first. When the

programmed recording that started first ends, recording will

switch to the next scheduled programme. At this time,

depending on how far the scheduling times overlap, the

beginning section of the next scheduled programme may not

be recorded.

• When End Padding Time is set for the first programmed

recording (see page 45), depending on how far the

scheduling times overlap, the End Padding Time may be

ignored and recording of the next scheduled programme

may start. As priority is given to the time set in the Set Timer

menu over the Padding Time, recording will automatically

be triggered when the next scheduled programme start

time is reached during End Padding Time.

To confirm/delete Recording

Information

Recording Information