Bedienungsanleitung Toshiba 40SL980DG (Seite 38 von 90) (Englisch)

527847

Zoom out

Zoom in

Vorherige Seite

1/90

Nächste Seite

CONTROLS AND FEATURES

English

b Press B or b to select Wireless Setup and press OK.

c Press B or b to select Assisted Setup and press OK.

d Press B or b to select the desired AP and press OK.

NOTE: Check the MAC address on the label of the AP

or in the manual, and select your AP.

e Highlight Security Key and press OK. The Software

Keyboard window will appear.

f Input the Security Key by using the Software

Keyboard (see page 41). To save your setting, press

the BLUE button.

NOTE:

• The Security Key must adhere to these conditions:

- TKIP/AES: 8-63 ASCII or 64 Hex characters

- WEP: 5 or 13 ASCII or 10 or 26 Hex characters

• There is only one key ID to set for WEP encryption.

g Highlight Done and press OK.

NOTE: If Network Name is not displayed, see step 3

and 4 in Manual Setup below to set Network Name

before pressing Done.

NOTE: Settings are not saved if BACK is pressed before Done

is selected.

Manual Setup

a In the Preferences menu, press B or b to select

Network Setup and press OK.

b Press B or b to select Wireless Setup and press OK.

c Press B or b to select Manual Setup and press OK.

d Press B or b to select Network Name and press OK.

The Software Keyboard window will appear.

e Input the Network Name by using the Software

Keyboard (see page 41). To save your setting, press

the BLUE button.

f Press B or b to select Authentication and press C or

c to select Open System, Shared Key, WPA-PSK or

WPA2-PSK.

g Press B or b to select Encryption and press C or c

to select None, WEP, TKIP or AES.

NOTE:

• Certain encryption types are only compatible with

specific authentication types.

- When Authentication is Open System, only WEP

or None is compatible.

- When Authentication is Shared Key, only WEP is

compatible.

- When Authentication is WPA-PSK or WPA2-PSK,

only TKIP or AES is compatible.

• When incompatible Authentication/Encryption

pairings are detected, a warning message will be

displayed, and no connection attempt will be made

until the incompatibility is resolved.

• There is only one key ID to set for WEP encryption.

h Press B or b to select Security Key and press OK.

i Input the Security Key by using the Software

Keyboard (see page 41). To save your setting, press

the BLUE button.

NOTE: This item is grayed out when Encryption is

None.

j Highlight Done and press OK.

NOTE: When Encryption is None, a message will

appear. Press

C or c to select Yes and press OK.

NOTE: Settings are not saved if BACK is pressed before Done

is selected.

Wireless Information

The settings configured in Wireless Setup can be confirmed.

a Press QUICK to open the Quick Menu.

b Press B or b to select Wireless Information and

press OK.

c When the Network Type is Wireless, a Wireless

Information window will appear.

NOTE: Press the RED button to scan for all APs.

Easy Setup

Manual Setup

Wireless Setup

Assisted Setup

Quick Menu

More Information

Speakers

Channel Options

HDMI CEC Device Control

Intel

Wireless Display

Wireless Information

TV Speakers

Headphone Level

Sleep Timer

00:00

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba 40SL980DG Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Toshiba 40SL980DG

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info