527847
77
Zoom out
Zoom in
Vorherige Seite
1/90
Nächste Seite
77
CONTROLS AND FEATURES
English
When Amplifier Control is set to on/off the connected HDMI
CEC Control amplifier.
a In the HDMI CEC Control Setup menu, press b to
highlight Amplifier Control.
b Press C or c to select On or Off.
The Initial Speaker Setting allows to select TV speakers or
Amplifier speakers.
a In the HDMI CEC Control Setup menu, press b to
highlight Initial Speaker Setting.
b Press C or c to select TV Speakers or Amplifier.
If a HDMI CEC Control device with HDMI switching capability
(e.g. AV amplifier) is connected to the HDMI input, you can select
another HDMI CEC Control device that is connected to the
master HDMI device on the input source list.
a Press o and a list will appear on screen showing
available input sources.
b Press b to select the input source that the HDMI CEC
Control devices are connected.
c Press c and a second selection screen will appear
showing all connected HDMI CEC Control equipment.
d Press B or b to select the desired input source, and
then press OK.
NOTE:
These functions depend on the device connected.
If you select the HDMI CEC Control input source from the
popup window, some HDMI CEC Control devices may
automatically turn on.
If the HDMI cable from connected equipment is changed,
Enable in the HDMI CEC Control Setup menu may need to
be reset to On.
If you change the HDMI lead to a connected device or
change an HDMI device setting, reset the Enable HDMI CEC
Control item on the HDMI CEC Control Setup menu from
Off to On.
When connected equipment is switched on, HDMI CEC
Control will automatically detect the television through the
input selection. If the television is in standby, it will be
switched on automatically.
These functions can be enabled or disabled from the HDMI
CEC Control Setup (see page 76).
NOTE:
Even if the equipment is showing a menu, the television
may automatically show the input source.
This feature depends on the connected equipment and
television state.
If the television is turned off (standby mode), the television
will send a message to turn off (standby mode) all of the HDMI
CEC Control devices connected to the television.
These functions can be enabled or disabled from the HDMI
CEC Control Setup (see page 76).
NOTE: This feature depends on the connected equipment
and television state.
Amplifier Control
Initial Speaker Setting
HDMI CEC Control input source selection
Inputs
TV
1
2
HDMI 2
HDMI 1
PC
HDMI 3
1 DVD
2 VCR/DVR
3 CBL/SAT
4 GAME/TV
5 AUX
HDMI CEC Control one touch play
HDMI CEC Control system standby
77

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Toshiba 40SL980DG wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Toshiba 40SL980DG

Toshiba 40SL980DG Bedienungsanleitung - Deutsch - 90 seiten

Toshiba 40SL980DG Bedienungsanleitung - Holländisch - 90 seiten

Toshiba 40SL980DG Bedienungsanleitung - Französisch - 90 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info