Bedienungsanleitung Toshiba 42M7453 (Seite 6 von 104) (Englisch)

560917

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

English

INSTALLING YOUR TV

Installation and important information

Locate the television away from direct sunlight and strong

lights. Soft, indirect lighting is recommended for comfortable

viewing. Use curtains or blinds to prevent direct sunlight

falling on the screen.

Place the TV on a stable, level surface that can support

the weight of the TV. In order to prevent injury and maintain stability of this apparatus, it is

recommended to secure the TV using the fixings on the stand strap or “P” clips.

The LCD display panels are manufactured using an extremely high level of precision technology; however,

sometimes some parts of the screen may be missing picture elements or have luminous spots. This is not

a sign of a malfunction.

Make sure the television is located in a position where it cannot be pushed or hit by objects, as pressure

will break or damage the screen. Also, please be certain that small items cannot be inserted into slots or

openings in the case.

Avoid using chemicals (such as air refreshers, cleaning agents, etc.) on or near the TV pedestal.

Studies indicate that plastics may weaken and crack over time from the combination effects of

chemical agents and mechanical stress (such as weight of TV). Failure to follow these instructions could

result in serious injury and/or permanent damage to TV and TV pedestal.

Use a wall bracket appropriate for the size and weight of

the LCD TV.

• Two people are required for installation.

• Install a wall-mount from another manufacturer.

1 Unplug and remove any cables and/or other

component connectors from the rear of the TV.

2 Carefully lay the front of the unit face down on a flat,

cushioned surface such as a quilt or blanket.

3 Follow the instructions provided with your wall bracket.

Before proceeding, make sure the appropriate

bracket(s) are attached to the wall and the back of the

TV as described in the instructions provided with the

wall bracket.

4 Always use the screws supplied or recommended by

the wall mount manufacturer.

Removing the Pedestal Stand:

1 Carefully lay the front of the unit face down on a flat,

cushioned surface such as a quilt or blanket. Leave

the stand protruding over the edge of the surface.

NOTE: Extreme care should always be used when

removing the pedestal stand to avoid damage to the

LCD panel.

2 Remove the cover and screws.

3 Once you have removed all screws holding the

pedestal stand in place, remove the pedestal stand

from the TV by sliding the pedestal stand away from

the TV.

• Interoperability with MHL devices of other

manufacturers is not guaranteed.

• Toshiba does not provide any guarantee, therefore,

against operational failure such as that described below

when an MHL source is connected to the TV.

- No picture or sound

- Some of the functions do not work by remote

operation from the TV

• If the MHL does not work properly, also contact the

manufacturer of the source device for advice on its use.

Where to install

Stand style is dependent on model

When using a Wall Bracket

Screws

When using MHL (Mobile High-definition Link)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba 42M7453 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Toshiba 42M7453

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info