Bedienungsanleitung Toshiba 42XV540 (Seite 52 von 74) (Englisch)

45983

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

XV540U (E/F) Web 213:276

Chapter 6: Using the TV’s features

Using the StableSound

feature

The StableSound

feature limits the highest volume level to

prevent extreme changes in volume when the signal source

changes (for example, to prevent the sudden increase in

volume that often happens when a TV program switches to a

commercial).

To turn on the StableSound

feature:

1 From the Audio menu, highlight Audio Settings and

press T.

2 In the StableSound field, select On.

3 To save the new settings, highlight Done and press T.

To revert to the factory defaults, highlight Reset and

press T.

Note: The RESET function returns your audio adjustments

to the following factory settings:

Bass . . . . . . . . center (50)

Treble . . . . . . . center (50)

Balance . . . . . . center (0)

StableSound . . Off

Note: This feature will be gray out in digital channels, to turn it

On or Off, it's necessary to be tuned in an analog channel.

To turn off the StableSound feature:

Select Off in step 2 above.

Selecting the optical audio output format

You can use this feature to select the optical audio output

format when you connect a Dolby Digital decoder or other

digital audio system to the DIGITAL AUDIO OUT terminal

on the TV (- “Connecting a digital audio system” on

page 18).

To select the optical audio output format:

1 From the Audio menu, highlight Audio Setup and press

2 In the Optical Output Format field, select either

Dolby Digital or PCM, depending on your device.

3 To save the new settings, highlight Done and press T.

To revert to the factory defaults, highlight Reset and

press T.

Using the Dolby

Digital Dynamic Range

Control feature

This dynamic range control feature causes the ATSC dynamic

range to be further compressed, allowing you to switch from

digital to analog broadcasts at the same dynamic range.

To use the Dolby Digital Dynamic Range Control:

1 From the Audio menu, highlight Audio Setup and press

2 In the Dolby Digital Dynamic Range Control field,

select Compressed. When Standard is selected, the

audio is output with minimal compression.

3 To save the new settings, highlight Done and press T.

To revert to the factory defaults, highlight Reset and

press T.

Note:

• This item will be grayed out for Analog signals, Video,

ColorStream, HDMI, and PC inputs.

• The Dolby Digital Dynamic Range Control will function in

relation to Optical Output Format (PCM mode).

Using the Locks menu

The Locks menu includes the Enable Rating Blocking, Edit

Rating Limits, Channels Block, Input Lock, Control Panel

Lock, GameTimer, and New PIN Code features. You can use

these features after entering the correct PIN code.

Entering the PIN code

On the remote control or TV control panel, press Y and

highlight the Locks menu icon.

Input Lock

New PIN Code

Control Panel Lock

Enable Rating Blocking

Channels Block

Off

GameTimer

Off

Edit Rating Limits

Locks

42XV540U_EN.book Page 52 Thursday, March 6, 2008 11:06 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba 42XV540 Seite 52

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info