16
Setting Antenna or Cable
Ant/Cable In (if available)
1
2
Press MENU and use
z
or
x
to select SETUP.
Use
e
to highlight Ant/Cable In.
Press
z
or
x
to select Antenna or Cable.
A screen will appear warning that the televisions
features will be changed.
The Auto Tuning screen will appear. When
Cable has been selected the Auto Tuning
screen will show setting options.
3
4
When the options have been set use
e
or
f
to
highlight Tuning Mode, then press
z
or
x
to
select between DTV and ATV, DTV or ATV.
Press
e
to highlight Start Scan, then press OK.
If this feature is available the television can be configured
to either Antenna or Cable. If the setting is changed the
Auto Tuning screen will automatically appear (if a Pin
Code has been set this will have to be entered in order
to change the setting). All current programmes and
settings will be lost.
With the exception of Scan Type and Modulation, all of
the settings have two options:
Auto – values are pre-set by the television’s operating
system.
Input – allows a single value to be entered in place of the
pre-set value. If no channel is currently tuned and Input is
chosen a system default value will be displayed. If a
channel is currently tuned and Input is chosen the value
of the channel will be displayed.
Scan Type
There are two options, Full Scan and Quick Scan. Quick
Scan is a simplified version of Full Scan and takes less
time to complete.
Start Frequency
This sets the frequency from which the scan will start.
End Frequency
This sets the frequency at which the scan will stop.
The valid entry range for frequency items is 113.000-
858.000 for C-Book/Other and 114.000-858.000 for
Nordig-C. If numbers outside of this range are entered
the values will automatically set to the minimum or
maximum valid values.
Modulation
There are five QAM modulation settings to choose from.
Symbol Rate
This is the Baud rate (KS/s) of the scan.
The valid entry range for Symbol Rate is 4000-7200. If a
number outside of this range is entered the value will
automatically set to the minimum or maximum valid
value.
Network ID
This is the Network ID to be used for the scan. This item
is greyed out when the Scan Type is set to Full Scan.
The valid entry range for Network ID is 1-65535. If a
number outside of this range is entered the value will
automatically set to the minimum or maximum
valid value.
SETUP
Menu Language English
Country UK
Ant/Cable In Antenna
Auto Tuning
ATV Manual Tuning
DTV Manual Tuning
DTV Settings
AV Connection
Auto Tuning
Tuning Mode DTV and ATV
Start Scan
DTV
Scan Type Full Scan
Start Frequency Auto
End Frequency Auto
Modulation Auto
Symbol Rate Auto
Network ID Auto
