Bedienungsanleitung Toshiba 43U6863 (Seite 16 von 34) (Englisch)

681911

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

English - 15 -





Disable the network connection or change the connection type.

Scan Wireless



Start a search for wireless networks. This option will be available if the 

is set as Wireless Device.

Press WPS on your

wifi router

If your modem/router device has WPS, you can directly connect to it using this option.

Highlight this option and press OK. Go to your modem/router device and press the

WPS button on it to make the connection. This option will be available if the 

Type is set as Wireless Device.

Internet Speed Test

Start a speed test to check your connection bandwidth. The result will be displayed on

the screen when finished.

Advanced Settings

Change the IP and DNS configurations of your TV.

Wake On

Enable or disable this feature by setting it as On or Off.

Note: For detailed information on the options of this menu refer to the Connectivity section.

Installation Menu Contents

Automatic channel

scan (Retune)

Displays automatic tuning options.  Searches and stores aerial DVB stations.

 Searches and stores cable DVB stations. Analogue: Searches and stores

analogue stations. 

Manual channel

scan

This feature can be used for direct broadcast entry.



scan

Searches for the linked channels in the broadcast system.  Searches for aerial

network channels. Searches for cable network channels. Satellite: Searches

for satellite network channels.

Analogue fine tune

You can use this setting for fine tuning analogue channels. This feature is not available

if no analogue channels are stored and if currently watched channel is not an analogue

channel.

Satellite Settings

Displays satellite settings. Satellite list: Displays available satellites. You can Add,

Delete satellites or Edit satellite settings on the list. Antenna installation: You can

change satellite antenna settings and/or start a satellite scan.

Installation Settings

(optional)

Displays installation settings menu. Your TV will search for new or

missing channels while in standby. Any new found broadcasts will be shown. Dynamic

Channel Update(*): If this option is set as Enabled, the changes on the broadcasts

such as frequency, channel name, subtitle language etc., will be applied automatically

while watching.

(*) Availability depends on model.



Use this setting to clear channels stored. This setting is visible only when the Country

option is set to Denmark, Sweden, Norway or Finland.

Select Active



This setting allows you to select only the broadcasts within the selected network to be

listed in the channel list. This feature is available only for the country option of Norway.

Signal Information

You can use this menu item to monitor signal related information such as signal level/

quality, network name etc for available frequencies.



Deletes all stored channels and settings, resets TV to factory settings.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba 43U6863 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Toshiba 43U6863

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info