Bedienungsanleitung Toshiba 46UL985G (Seite 18 von 102) (Englisch)

526283

Zoom out

Zoom in

Vorherige Seite

1/102

Nächste Seite

SETTING UP YOUR TV

English

o Press OK. If your country supports Network Guide,

The Guide Type screen will appear.

Press

C or c to select Broadcast Guide or

MediaGuide.

NOTE: If you select MediaGuide, it may take time to

access the Guide screen depending on active channel

numbers.

p Press OK. If the Ant/Cable/Satellite screen appears,

press

B or b to select Antenna, Cable or Satellite

and then press OK to check ( ).

If DVB-C is not supported in your area, Cable will not

be displayed.

• When you select Antenna or Cable, follow steps 17

to 20.

• When you select Satellite, skip to step 21.

• When you select Antenna (or Cable) and Satellite,

the Satellite Settings startup screen will appear

automatically after completing the Antenna (or

Cable) scan and pressing OK.

q Select Next and press OK. The Auto Tuning start up

screen will appear with the option to select between

DTV and ATV, DTV or ATV if available. Use

C or c to

select the appropriate mode.

r Press B or b to highlight Start Scan, and then press

OK.

The television will start to search for available DTV

and/or ATV channels. The progress bar will indicate

the scan status.

You must allow the television to complete the

search.

When the search is complete, the television will

automatically select channel one.

The Auto Tuning screen will display the total number

of services found.

s Press C or c to view the DTV (digital channel) or ATV

(analogue channel) lists.

T Use B or b to move through the list to select a

channel, and then press OK to view.

In ATV mode, some areas may receive duplicate

stations. There may not be a clear picture or the signal

may be weak, so the station order can be changed

using ATV Manual Tuning.

REMEMBER: Press TV at any time to select between

ATV and DTV modes.

NOTE: The time will be set automatically by

transmission but can be advanced or decreased by

using Local Time Setting in the DTV Settings screen.

u Select Next and press OK. The Satellite Settings

screen will appear. From this window, you can add the

satellites that you wish to tune and configure detailed

settings for each one individually.

Select Switch Type and choose the correct switch

configuration for your satellite dish from the settings

None, ToneBurst, DiSEqC 2way, DiSEqC 4way or

Single cable.

TV Guide Selection

Broadcast Guide

Electronic Program Guide accessed by the “GUIDE” key of your

remote control:

Select “MediaGuide” if you want to use the advanced rich media

EPG provided through the network.

*Your TV must be connected to the network.

Select “Broadcast Guide” if you want to use the simple EPG

provided by our local broadcast network, if any.

Ant/Cable/Satellite

Cable

Satellite

Antenna

Auto Tuning - Antenna

Progress Found

ATV Tune Waiting...

: C7Channel

DTV Tune 3 % 2

SatelliteNo. Dish LNB

ASTRA 19.2˚E

Satellite Settings

Transponder: 1/85 (10729 MHz)

Dish Type: Fixed

Lower LOF: 9750

Upper LOF: 10600

Switch Type

None

LNB Power

Done

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba 46UL985G Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Toshiba 46UL985G

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info