Bedienungsanleitung Toshiba 46xv625d (Seite 8 von 57) (Englisch)

144833

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

English

CONNECTING YOUR TV

Connecting external equipment

Before connecting any external equipment, turn off all main power switches. If there is no switch

remove the mains plug from the wall socket.

Aerial cables:

- - - - - - - - - - - - - - - - - - - - - -

Connect the aerial to the socket on the rear of the television.

If you use a decoder* and/or a media recorder it is essential

that the aerial cable is connected through the decoder and/or

through the media recorder to the television.

SCART leads:

. . . . . . . . . . . . . . . . . . . . . . . . . .

Connect the video recorder

OUT

socket to the television.

Connect the decoder

socket to the television. Connect the

media recorder

SAT

socket to the decoder

MEDIA REC

. socket.

Before running

Auto Tuning

, put your decoder and media

recorder to

Standby

The phono sockets alongside the COMPONENT VIDEO INPUT

sockets will accept L and R audio signals.

The Digital Audio Output socket enables the connection of a

suitable surround sound system.

NOTE: this output is always

active

HDMI™ (High-Definition Multimedia Interface) is for use with

a DVD decoder or electrical equipment with digital audio and

video output.

For acceptable video or PC signal formats through the HDMI

terminals, see page 56.

NOTE:

Although this television is able to connect to HDMI

equipment it is possible that some equipment may not operate

correctly.

A wide variety of external equipment can be connected

to the back of the television; therefore, the relevant

owners manuals for

all

additional equipment must be

referred to for exact instructions.

We recommend

SCART 1

for a decoder and

SCART 2

for a

media recorder.

If connecting S-VIDEO equipment, set the

INPUT

for

EXT 2

See

page 45

If the television automatically switches over to monitor external

equipment, return to normal television by pressing the desired

programme position button. To recall external equipment,

press

to select between

DTV

EXT 1

EXT 2

EXT 3

HDMI 1

HDMI 2

HDMI 3

HDMI 4

ATV

button is pressed while viewing DTV mode, the picture

on your screen and the SCART output will become a still

picture.

When the external input mode is selected while viewing DTV

mode, the SCART socket does not output video/audio signals.

The SCART output will also be muted in EPG mode.

COMPONENT VIDEO INPUT (EXT 3)

HDMI™ INPUT

SOCKETS

SCART 2 (EXT 2)

FIXING STRAP

SCART 1 (EXT 1)

decoder*

media recorder

*a decoder could

be Digital Satellite or

any other compatible

decoder.

POWER switch

OPTICAL DIGITAL AUDIO OUTPUT

Illustration represents 42XV635D.

Antenna/Cable

Manufactured under license from Dolby Laboratories.

Dolby and the double-D symbol are registered trademarks

of Dolby Laboratories.

HDMI, the HDMI logo, and High-Definition Multimedia

Interface are trademarks or registered trademarks of HDMI

Licensing, LLC.

INSTAPORT™ and INSTAPORT logo are trademarks of Silicon Image, Inc.

in the United States and other countries.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba 46xv625d Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Toshiba 46xv625d

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info