Bedienungsanleitung Toshiba 47L7453 (Seite 28 von 100) (Englisch)

560912

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

English

CONTROLS AND FEATURES

The time display facility allows the current (text service)

time to be seen on the television screen.

Press

D whilst watching a normal television

broadcast to see the time display from the broadcaster. It

will remain on screen for about 5 seconds.

NOTE: This display may not be available in some cases.

For DTV programmes

For stereo or dual mono broadcasts, press s and use

C / c to select settings.

For multi-audio track broadcasts, press

s repeatedly to

change the audio language (see “Audio languages” on page

76).

For ATV programmes

If stereo or dual language broadcasts are transmitted, the

word Stereo or Dual will appear on the screen each time

channels are changed, disappearing after a few seconds.

If the broadcast is not in stereo, the word Mono will

appear.

Stereo… Press

s to select Stereo or Mono.

Bilingual… Bilingual transmissions are rare. If they are

transmitted, the word Dual will be displayed. Choose the

required programme number, and if the word Dual

appears, press

s to select Dual 1, Dual 2 or Mono.

Using 3D functions

Before using 3D programming, see and follow

“Important information for 3D viewing” section

on page 97.

Viewing 3D programming requires the

following:

• 3D glasses (supplied)

• Compatible 3D playback device or 3D source

• 3D capable high quality HDMI cable

Incoming video signals can either be in 2D or 3D format.

A 2D signal can be viewed in either 2D or 3D, and 3D can

be viewed in either 2D or 3D. If the TV can detect the fact

that a signal is 3D, it can change to 3D mode automatically

– see “Setting the auto start mode” (on page 30).

Otherwise you can change the viewing mode using the 3D

button. Finally, the format of the 3D signal can be either

Side by Side (SBS) or Top and Bottom (TB). You may

have to choose the correct format if the TV can not detect

it automatically – see “Switching display mode or selecting

3D format”.

Moreover, you can change 2D images to 3D images by

pressing the 3D button when viewing in 2D.

NOTE:

• When 3D format signal is not received, display mode is

not switched to 3D.

• If appropriate mode and format are not selected, 3D

image is not correctly displayed.

• There will be restrictions on the Picture Size settings for

3D Mode and 2D Mode.

• There are individual differences in perception of 3D

images.

• When viewing 3D images, wear the 3D Glasses.

The Time Display – analogue only

Stereo and Bilingual transmissions

Mode Display Pressing c

Stereo Stereo S Left S Right

Dual mono Dual 1

S Dual 2

Mono –

Multichannel –

Viewing 3D images

Viewing Angle Viewing Distance

42L74** Approx. 26 deg. Over 1.6 m

47L74** Approx. 26 deg. Over 1.8 m

55L74** Approx. 26 deg. Over 2.1 m

Center of Display

Viewing

Angle

Same height as

Center of Display

Viewing Distance

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba 47L7453 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Toshiba 47L7453

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info