Bedienungsanleitung Toshiba 47WL968 (Seite 39 von 102) (Englisch)

646841

Zoom out

Zoom in

Vorherige Seite

1/102

Nächste Seite

CONTROLS AND FEATURES

English

DNR allows you to “soften” the screen representation of a weak

signal to reduce the noise effect.

a Select DNR from the Noise Reduction menu.

b Press C or c to select Low, Middle, High, Auto or Off.

The differences may not always be noticeable (for the

best result use lower settings as picture quality can be

lost if the setting is too high).

The Resolution+ feature allows you to adjust the clarity levels

for your desired picture settings.

a In the Advanced Picture Settings menu, press B or

b to select Resolution+ and press OK.

b Press C or c to select On.

NOTE:

• This feature may not work properly depending on the

content.

• Noise may appear in the picture depending on the device

connected to the TV (e.g. a device with a specific enhancer

function).

This feature will reduce picture blur without decreasing image

brightness or adding flicker.

a In the Advanced Picture Settings menu, press B or

b to select Clear Scan.

b Press C or c to select High, Middle, Standard or Off.

NOTE: When Picture Mode is set to Game, this feature will be

grayed out and automatically set to Off.

This feature allows you to reset the current Advanced Picture

Settings to the default values.

a In the Advanced Picture Settings menu, press B or

b to select Reset.

b Press OK.

This feature is available when the Picture Mode option is

Standard, Hollywood Day, Hollywood Night, and

Hollywood Pro.

Test Pattern

When the test pattern is on screen, you can navigate in the

Picture submenus and adjust picture settings without

removing the image.

When you move to a non-Picture menu, or close the menus,

regular video will be restored.

a In the Picture menu, press B or b to select Expert

Picture Settings and press OK to display Expert

Picture Settings menu.

b Press B or b to select Test Pattern.

c Press C or c to select On.

d Press EXIT to close.

RGB Filter

This feature individually enables or disables the red, green,

and blue components of the picture to allow for more

accurate adjustment of each colour.

a In the Expert Picture Settings menu, press B or b to

select RGB Filter and press OK.

b Press B or b to select Red, Green or Blue to adjust.

c Press C or c to select On.

d Press B or b to select Colour or Tint and press C or

c to adjust.

e Press EXIT.

NOTE: It is not possible to turn off all three colours

simultaneously.

Colour Decoding

If you view DVDs with this TV, the Colour Decoding option

may be set to ensure the colourimetry reproduction.

NOTE: The modes excluding Auto (BT601 and BT709) are to

convert an irregular signal output from the DVD etc. with

incorrect colour to the optimum state. If BT601 or BT709 is

selected with a normal signal received, the colour may not be

correctly displayed. This feature should normally be set to

Auto.

a In the Expert Picture Settings menu, press B or b to

select Colour Decoding.

b Press C or c to select Auto, BT601 or BT709.

DNR – Digital Noise Reduction

Resolution +

Clear Scan

Resetting the advanced picture settings

Expert Picture Settings

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba 47WL968 Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Toshiba 47WL968

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info