Bedienungsanleitung Toshiba 47WL968 (Seite 44 von 102) (Englisch)

646841

Zoom out

Zoom in

Vorherige Seite

1/102

Nächste Seite

CONTROLS AND FEATURES

English

Setting up the Network

You can select the Network Type.

a Press MENU / C c to highlight Setup icon.

b Press B / C c to highlight Preferences icon and

press OK.

c Press B or b to select Network Setup and press OK.

d Press B or b to select Connection Type and press C

c to select Wired or Wireless.

e If you selected Wired, see “Advanced Network Setup”

on page 46.

NOTE: After you change between Wireless and Wired,

switch off and on AC power supply to reset your TV.

Communication may be impossible after the change of

Wireless / Wired.

NOTE: Continued connection of AP (Access Point) is not

guaranteed. The connection may be disconnected while

watching TV.

There are 3 methods for Wireless Setup

Easy Setup (WPS)

If the AP supports WPS, this method can be used.

• WPS is an industry standard designed to make connection

of wireless LAN equipment and security setup easy. WPS

will automatically configure all wireless settings.

NOTE: WEP encryption may not be able to configured by easy

setup.

Assisted Setup (setup by using the AP’s notification

information)

Network Name, Authentication, and Encryption are decided

based on information from the AP. You will manually set the

Security Key.

Manual Setup (manual input of all settings)

Easy Setup using PBC (Push Button Configuration)

a In the Preferences menu, press B or b to select

Network Setup and press OK.

b Press B or b to select Wireless Setup and press OK.

c Press B or b to select Easy Setup and press OK.

d Press C or c to select PBC.

e Press b to highlight Start Scan and press OK.

f Following the on-screen instructions, push the

appropriate button on your AP.

g When a window reporting that the setup is complete

appears, press OK.

Easy Setup using PIN (Personal Identification

Number)

a In the Preferences menu, press B or b to select

Network Setup and press OK.

b Press B or b to select Wireless Setup and press OK.

c Press B or b to select Easy Setup and press OK.

d Press C or c to select PIN.

e Press b to select Start Scan and press OK.

f Press B or b to select the desired AP and press OK.

NOTE: Check the Network Name and/or MAC address

on the label of the AP or in the manual, and select

your AP.

g When the PIN code window appears, enter the

displayed PIN into your AP, and then press Next to

continue the PIN Setup. When a message displays to

report that the setup is complete, press OK.

To cancel searching for the AP:

Press BACK while searching for the AP. A message will

appear, and then press C or c to select Yes and press

OK.

Assisted Setup

a In the Preferences menu, press B or b to select

Network Setup and press OK.

Wireless Setup

Recording Setup

Off

Auto

Network Setup

Teletext

TV Guide Selection

Network Device Setup

Network Lock

3D Setup

Preferences

HDMI CEC Control Setup

Connection Type Wired

Network Connection Test

Advanced Network Setup

Network Setup

Wireless Setup

Easy Setup

Manual Setup

Wireless Setup

Assisted Setup

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba 47WL968 Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Toshiba 47WL968

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info