Bedienungsanleitung Toshiba 49U6663 (Seite 13 von 36) (Englisch)

681892

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

English - 12 -

available in System>Settings>More menu and can

be turned off/on later.

Press OK button on the remote control to continue

and the Network/Internet Settings menu will be

displayed, if you conrm the previously displayed

message asking whether you want to do the network

settings. Please refer to Connectivity section to

congure a wired or a wireless connection. After the

settings are completed press OK button to continue.

To skip to the next step without doing anything select

No and press the OK button when the message is

displayed asking whether you want to do the network

settings.

After the initial settings are completed TV will start

to search for available broadcasts of the selected

broadcast types.

After all the available stations are stored, scan results

will be displayed. Press OK to continue. The Edit

Channel List menu will be displayed next. You can

edit the channel list according to your preferences or

press the Menu button to quit and watch TV.

While the search continues a message may appear,

asking whether you want to sort channels according

to the LCN(*). Select Yes and press OK to conrm.

(*) LCN is the Logical Channel Number system that organizes

available broadcasts in accordance with a recognizable

channel number sequence (if available).

Note: Do not turn off the TV while initializing first time

installation. Note that, some options may not be available

depending on the country selection.

Using SatcoDX Feature

You can perform SatcoDX operations using the

Installation>Satellite Settings menu. In the

SatcoDX menu, there are two options regarding to

the SatcoDx.

You can download or upload SatcoDX data. In order

to perform these functions a USB device must be

connected to the TV.

You can upload current services and related satellites

& transponders in TV, to a USB device.

Additionally you can download one of the SatcoDx

les stored in USB device, to the TV.

When you select one of these les, all services and

related satellites and transponders in the selected

le will be stored in the TV. If there are any installed

terrestrial, cable and/or analog services, they will be

kept and only satellite services will be removed.

Afterwards, check your antenna settings and make

changes if necessary. An error message stating “No

Signal” may be displayed if the antenna settings are

not congured properly.

Media Playback via USB Input

You can connect 2.5” and 3.5” inch (hdd with external power

supply) external hard disk drives or USB memory stick to your

TV by using the USB inputs of the TV.

IMPORTANT! Back up the les on your storage devices

before connecting them to the TV. Manufacturer will

not be responsible for any le damage or data loss.

Certain types of USB devices (e.g. MP3 Players)

or USB hard disk drives/memory sticks may not be

compatible with this TV. The TV supports FAT32

and NTFS disk formatting but recording will not be

available with NTFS formatted disks.

While formatting USB hard drives which have

more than 1TB (Tera Byte) storage space you may

experience some problems in the formatting process.

Wait a little while before each plugging and unplugging

as the player may still be reading les. Failure to do

so may cause physical damage to the USB player

and the USB device itself. Do not pull out your drive

while playing a le.

You can use USB hubs with your TV’s USB inputs.

External power supplied USB hubs are recommended

in such a case.

It is recommended to use the TV’s USB input(s)

directly, if you are going to connect a USB hard disk.

Note: When viewing image les the Media Browser menu

can only display 1000 image les stored on the connected

USB device.

Recording a Programme

IMPORTANT: When using a new USB hard disk

drive, it is recommended that you rst format the disk

using your TV’s Format Disk option in the Media

Browser>Settings>Recording Settings menu.

To record a programme, you should rst connect a

USB disk to your TV while the TV is switched off. You

should then switch on the TV to enable the recording

feature.

To use recording your USB drive should have 2 GB

free space and be USB 2.0 compatible. If available,

USB 3.0 compatible devices can be used too with the

optional USB 3.0 input on the side of the TV, which

will be positioned above the other USB input. If the

USB drive is not compatible an error message will

be displayed.

To record long duration programmes such as movies,

it is recommended to use USB Hard disk drives

(HDD’s).

Recorded programmes are saved into the connected

USB disk. If desired, you can store/copy recordings

onto a computer; however, these les will not be

available to be played on a computer. You can play

the recordings only via your TV.

Lip Sync delay may occur during the timeshifting.

Radio record is supported. The TV can record

programmes up to ten hours.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba 49U6663 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Toshiba 49U6663

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info