Bedienungsanleitung Toshiba 49UL2A63 (Seite 6 von 35) (Englisch)

698388

Zoom out

Zoom in

Vorherige Seite

1/35

Nächste Seite

English - 5 -

Start early: You can set recording timer’s starting

time to start earlier by using this setting.

End late: You can set recording timer’s end time to

end later by using this setting.

Max Timeshift: This setting allows you to set the

maximum duration for the timeshift recording.

Available options are approximate and the actual

recording time may change in practice depending on

the broadcast. The reserved and free storage space

values will change according to this setting. Make

sure that you have enough free space otherwise

instant recording may not be possible.

Auto discard: You can set the Discard type as

, Oldest, Longest or Shortest. If it is not

set to , you can set the Unplayed option as

Included or Excluded. These options determine

the preferences for deleting the recordings in order

to obtain more storage space for ongoing records.

Hard disk information: You can view detailed

information about the USB storage device connected

to your TV. Highlight and press OK to see and press

 to close.

Format Disk: If you want to delete all files on the

connected USB storage device and convert the disk

format to FAT32, you can use this option. Press OK

button while the Format Disk option is highlighted.

A menu will appear on the screen, requiring you

to enter the PIN(*). After you enter the PIN, a

confirmation message will be displayed. Select Yes

and press OK to start formatting the USB storage

device. Select  and press OK to cancel.

(*) Default PIN could have been set to 0000 or 1234. If you

have defined the PIN(is requested depending on the country

selection) during the First Time Installation use the PIN

that you have defined.

Settings

You can manage the settings of your TV using the op-

tions of this menu. Refer to Settings Menu Contents

section for more information.

Apps

When your TV is connected to the Internet related

contents will also be available, including Apps related

contents. Using the Apps menu you can access and

manage your applications. You can add new apps from

the market or delete the existing ones. Refer to Apps

section for more information.

Source

You can manage your input source references using

the options of this menu. To change the current source

highlight one of the options and press OK.

Source Settings

       

    Regular, Enhanced and

Regular

and Enhanced

of the selected HDMI source. To be able to watch 4K or



Enhanced



Regular  



.

Inserting the Batteries into the Remote

Remove the back cover to reveal the battery

compartment. Insert two size AAA batteries. Make

sure the (+) and (-) signs match (observe correct

polarity). Do not mix old and new batteries. Replace

only with same or equivalent type. Place the cover back

on. A message will be displayed on the screen when

the batteries are low and must be replaced.

Note that when the batteries are low, the performance

of the remote control may be impaired.

Power Connection

: The TV set is designed to operate on a

 supply. After unpacking, allow the

TV set to reach the ambient room temperature before

you connect the set to the mains. Plug the power cable

to the mains socket outlet.

Antenna Connection

Connect the aerial or cable TV plug to the AERIAL

INPUT (ANT.) socket or satellite plug to the SATELLITE

INPUT (LNB) socket located on the rear side of the TV.

Rear side of the TV

 Satellite

 Aerial or cable

If you want to connect a device to the TV, make sure

that both the TV and the device are turned off before

making any connection. After the connection is done,

you can turn on the units and use them.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba 49UL2A63 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Toshiba 49UL2A63

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info