144584
29
Zoom out
Zoom in
Vorherige Seite
1/62
Nächste Seite
29
CONTROLS AND FEATURES
English
When the Auto Brightness Sensor is activated, it will
automatically optimise the backlighting levels to suit ambient
light conditions.
a In the Advanced Picture Settings menu, press b to
select Auto Brightness Sensor Settings and press
Q.
b Press C or c to select On and press Q.
c Press b to select Backlight Adjustment Pro and press
Q.
d The Backlight Adjustment Pro window will appear.
Press
Q again to display the adjustment window.
e Press C or c to select a point and press B or b to
adjust the level.
f Press Q to fix the adjustment.
To cancel the adjustment when selecting a point,
select Cancel and press
Q.
To return the adjustments of all points to the factory
defaults, select Reset and press
Q.
When LED Backlight Control is activated, it will automatically
optimise the backlighting levels for dark scenes.
a In the Advanced Picture Settings menu, press b to
select LED Backlight Control.
b Press C or c to select On or Off.
Black/White Level increases the strength of dark areas of the
picture to improve the definition.
a In the Advanced Picture Settings menu, press b to
select Black/White Level.
b Press C or c to adjust the level. The effect depends on
the broadcast and is most noticeable on dark colours.
The static gamma feature allows you to adjust the levels of
black in the picture.
a In the Advanced Picture Settings menu, press b to
select Static Gamma.
b Press C or c to adjust the level.
When watching a DVD, the compression may cause some
words or picture elements to become distorted or pixelated.
Using the MPEG NR feature reduces this effect by smoothing
out the edges.
a In the Advanced Picture Settings menu, press b to
select Noise Reduction and press
Q.
b Press b to select MPEG NR.
c Press C or c to select Low, Middle, High or Off to suit
your preference.
DNR allows you to ‘soften’ the screen representation of a
weak signal to reduce the noise effect.
a Select DNR from the Noise Reduction menu.
b Use C or c to select Low, Middle, High, Auto or Off.
The differences may not always be noticeable (for the
best result use lower settings as picture quality can be
lost if the setting is too high).
Auto Brightness Sensor Settings
LED Backlight Control
Auto Brightness Sensor Settings
Backlight Adjustment Pro
Auto Brightness Sensor
On
48
100
0
Backlight Adjustment Pro
Backlight Control Level
Control
Level
Ambient Light
Cancel
Reset
Black/White Level
Static Gamma
MPEG NR – Noise Reduction
DNR – Digital Noise Reduction
Noise Reduction
DNR
MPEG NR
Low
Auto
29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Toshiba 55sv685d wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info