Bedienungsanleitung Toshiba 55TL515U (Seite 89 von 102) (Englisch)

458631

Zoom out

Zoom in

Vorherige Seite

1/102

Nächste Seite

Chapter 10: Appendix

Searching for a device code

If you do not know the device code for a particular

device, you can view each available code for that device

mode and sample the functions to find the code that

operates the target device.

1 Press a mode select button on the remote.

2 While holding down Q, press 8, 5, 0, 0. The mode

select button blinks twice. The remote control enters

program mode.

3 Point the remote at the target device Press , 1,

, , or . The mode select button lights up.

Then press B or b to change a code.

4 If the device responds to the remote control:

Press Q to store the device code. The mode select

button blinks twice. The remote exits program

mode.

5 If the device does not respond to the remote control:

Repeat this step until the device responds to the

remote.

When no code is found, exit the program mode by

the following operation:

•Press Q. (current state is stored)

•Press no key for 10 seconds. (current state is not

stored)

Note: When a search cycle is completed, the remote

displays each available code again. If no key is pressed

within 10 seconds, the remote exits program mode and

returns to the previous code.

Locking the volume keys

The remote’s volume keys ( , , and MUTE) are

locked to a device mode.

See “Operating other devices” (- p. 88).

To lock the remote’s volume keys to a specific mode:

Example: CABLE/SAT mode

1 Press CABLE/SAT.

2 While holding down Q, press 8, 0, 0, 0.

3 Press . The CABLE/SAT mode select button

blinks 2 times (locked).

The remote’s volume keys now operate the volume

of the device associated with the CABLE/SAT

mode, even when CABLE/SAT is not the current

device mode.

To unlock the remote’s volume keys:

1 While holding down Q, press 8, 0, 0, 0.

2 Press . The CABLE/SAT mode select button

blinks 4 times. The CABLE/SAT mode is unlocked.

Clearing the remote’s programming

You can clear all programmed remote control features

not related to “Device code setup” and reset the volume

lock to the TV device mode.

While holding down Q, press 8, 9, 0, 0. The mode

select button blinks 4 times.

Resetting to the factory default

You can clear changed manufacturing features.

While holding down Q, press 8, 9, 0, 1. The mode

select button blinks 4 times.

State Meaning

Locked (default)

The remote operates the TV’s volume

except the AUX mode, even when the

TV is not the current device mode.

Unlocked

The remote operates the volume of the

device associated with the current

device mode.

Each device mode has its own volume

(if the device ID has volume data).

Locked to a

specific device

mode

The remote operates the volume of the

device associated with the locked

mode, even when the locked mode is

not the current device mode.

Note: The AUX mode is not locked to

other device modes.

POWER

VOL

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba 55TL515U Seite 89

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info