Bedienungsanleitung Toshiba 55UA2263 (Seite 19 von 47) (Englisch)

804190

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

English - 18 - (**) Limited Models Only

Channel Skip: Set channels to be skipped when

switching the channels via Programme +/- buttons

on the remote. Highlight the desired channel/s on the

list and press OK to select/unselect.

Channel Swap: Replace the positions of the two

selected channels in the channel list. Highlight the

desired channels on the list and press OK to select.

When the second channel is selected, the position of

this channel will be replaced with the position of the

Yellow button

and enter the number of the channel you want to select.

Then highlight OK and press OK to go to that channel.

You may need to set the LCN option to O󰀨 in order to

enable this feature.

Channel Move: Move a channel to the position of

another channel. Highlight the channel you want to

move and press OK to select. Then do the same for a

second channel. When the second channel is selected,

you can press the Blue

channel will be moved to the position of that channel.

You can press the Yellow button and enter the number

of the channel you want to select. Then highlight OK

and press OK to go to that channel. You may need to

set the LCN option to O󰀨 in order to enable this feature.

Channel Edit: Edit channels in the channel list. Edit

the name of the selected channel and display Network

Name, Channel Type and Frequency information

related to that channel if available. Depending on the

channel other options may also be editable. Press OK

or the Yellow button to edit the highlighted channel.

You can press the Blue button to delete the highlighted

channel.

Channel Delete: Highlight the desired channel/s on

the list and press OK or the Yellow button to select/

unselect. Then press the Blue button to delete the

selected channel/s.

Clear Channel List: Delete all channels stored in the

-

tion. Highlight OK and press OK button to proceed.

Highlight Cancel and press OK to cancel.

Input Source - Cable

Channel Scan: Start a scan for digital cable channels.

If available, operator options will be listed. Select the

desired one and press OK. Scan Mode, Frequency

and Network ID options may be available. The options

may vary depending on the operator and the Scan

Mode selections. Set the Scan Mode as Full if you

don’t know how to set up other options. Highlight Scan

and press OK or the Right directional button to start

the scan. You can press the Back/Return button to

cancel the scan. The channels that have already been

found will be stored in the channel list.

Single RF Scan: Enter the Frequency value. Signal

Level and Signal Quality of the selected Frequency

will be shown. Highlight the Scan option and press OK

or the Right directional button to start scan. The found

channels will be stored in the channel list.

LCN: Set your preference for LCN. LCN is the Logical

Channel Number system that organises available

broadcasts in accordance with a recognisable channel

number sequence (if available).

Channel Scan Type: Set your scan type preference.

Channel Store Type: Set your store type preference.

Favourite Network Select: Select your favourite net-

work. This menu option will be active, if more than one

network is available. This option may not be available

depending on the selected country during the initial

setup process.

Channel Skip: Set channels to be skipped when

switching the channels via Programme +/- buttons

on the remote. Highlight the desired channel/s on the

list and press OK to select/unselect.

Channel Swap: Replace the positions of the two

selected channels in the channel list. Highlight the

desired channels on the list and press OK to select.

When the second channel is selected, the position of

this channel will be replaced with the position of the

Yellow button

and enter the number of the channel you want to select.

Then highlight OK and press OK to go to that channel.

You may need to set the LCN option to O󰀨 in order to

enable this feature.

Channel Move: Move a channel to the position of

another channel. Highlight the channel you want to

move and press OK to select. Then do the same for a

second channel. When the second channel is selected,

you can press the Blue

channel will be moved to the position of that channel.

You can press the Yellow button and enter the number

of the channel you want to select. Then highlight OK

and press OK to go to that channel. You may need to

set the LCN option to O󰀨 in order to enable this feature.

Channel Edit: Edit channels in the channel list. Edit

the name of the selected channel and display Network

Name, Channel Type, Frequency, Modulation and

Symbol Rate information related to that channel.

Depending on the channel other options may also be

editable. Press OK or the Yellow button to edit the

highlighted channel. You can press the Blue button

to delete the highlighted channel.

Channel Delete: Highlight the desired channel/s on

the list and press OK or the Yellow button to select/

unselect. Then press the Blue button to delete the

selected channel/s.

Clear Channel List: Delete all channels stored in the

-

tion. Highlight OK and press OK button to proceed.

Highlight Cancel and press OK to cancel.

Toshiba 55UA2263 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Toshiba 55UA2263

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info