Bedienungsanleitung Toshiba 55WX800U (Seite 83 von 106) (Englisch)

456111

Zoom out

Zoom in

Vorherige Seite

1/106

Nächste Seite

Chapter 9: Troubleshooting

• The network setup on the Server is incorrect. Make sure

both the DMS and TV are using the same network type

(DHCP/manual) and have compatible network settings.

• Too many DMSs are connected. You cannot connect

more than 32 sharing devices at one time.

• The DMS is not turned ON.

• The “server” is not a

DMS device.

• Check the firewall and streaming settings on the DMS.

Wireless network problems

• Check that the router/AP (Access point) power is ON.

• After starting wireless network setup, confirm that the

network is configured properly by performing the

network connection test (- p. 64).

• Check the router/AP’s connection status (- p. 63).

• If the router/AP does not support PBC

or WPS, Easy

Setup (PBC) will not work even if the push-button is

pressed.

• If available router/AP list is not displayed in Easy Setup

(PIN) or Assisted Setup, the power of router/AP may be

OFF. Check that it is ON, and then try re-starting the scan

for available routers/APs.

• Refer to the router/AP instruction manual.

NET TV or Widget problems

• If the date and time display on the NET TV menu is

wrong, turn off the TV, and turn it on again.

• NET TV or Widgets may not be available after turning the

TV on while the system is booting.

• NET TV and Widgets are not available if Game or PC

mode is selected on the TV.

• Content delivered by NET TV or Widgets are the

responsibility of the Contents Service Provider. Conta

the Service Provider to discuss any content issues.

Media Player problems

• Ensure that the devices (Display and Server) are

connected correctly.

• Incorrect behavior may occur when using a USB HUB

connection.

• The size of pictures stored in the DMS may be

automatically changed by the DMS and improperly

displayed. This is a result of the DMS.

• Photo files that were processed and edited by using PC’s

application software may

not be able to be viewed.

• When viewing content that supports two or more

formats the display may select one format automatically.

• Copyright protected contents stored in the DMS may not

be able to be played on the display.

• Content playback stability may be affected by heavy

network traffic.

• Contents originally recorded on a PC may not play

correctly.

• Set the media sharing o

f the DMS correctly, according to

the DMS instruction manual.

• Confirm that the contents of either the DMS or the USB

storage device are in formats that are supported by this

TV (- p. 76, 77, or 79).

• Depending on the DMS, access may be limited by the

MAC address. Set the server according to the DMS’s

instruction manual. This TV’s MAC Address can be

confirmed

in the Network Setup portion of the User

Menu (- p. 64).

For DLNA CERTIFIED

™

Player

• Depending on the DMS, it may take time to display the

list.

For DLNA CERTIFIED

™

Renderer

• Depending the state of this TV, DMC may not be able to

control a DMR playback.

• If DMR playback starts regardless of the user's intention,

check the access control of DMS or set Media Renderer

to Off.

LED indications

The POWER and On Timer LED lights on the front of

the TV indicate the TV’s status, as described below.

Touch Sensor (POWER LED)

•Blue

The TV is operating properly.

•No light

The power is off or standby.

• Blue blinks

Fan Stopped. Turn off the TV and unplug the power

cord. Plug the power cord in again and turn on the TV.

•Red blinks

Power-On Failure. Turn off the TV and unplug the

power cord. Plug the power cord in again and turn on

the TV.

Note: To adjust the brightness of the POWER LED, see

“Adjusting POWER LED’s Dimmer” (- p. 48).

Touch Sensor (except POWER LED)

•White

Sensor is available.

On Timer LED

• Green is ON (solid)

On Timer is set.

• Green blinks (if applicable)

Abnormal operation of BUS line. Turn off the TV and

unplug the power cord. Plug the power cord in again

and turn on the TV.

After trying the solutions, if the problem persists:

•In the U.S., visit TACP Consumer Solutions on the

web at www.tacp.toshiba.com/customersupport/

or call 1-800-631-3811.

•In Canada, locate the nearest Toshiba authorized

service depot by directing your web browser to

www.toshiba.ca; click “Home Entertainment,” and

then click “Support.”

Power

Touch Sensor

INPUT

On Timer

VOL

TV front

WX800U_EN.pdf 83 2010/08/11 10:14:54

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba 55WX800U Seite 83

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info