Bedienungsanleitung Toshiba 55ZL1 (Seite 23 von 108) (Englisch)

461988

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

SETTING UP YOUR TV

English

k Press C or c to view the DTV (digital channel) or ATV

(analogue channel) lists.

l Press B or b to move through the list to select a

channel and press OK to view.

In ATV mode, some areas may receive duplicate

stations. There may not be a clear picture or the signal

may be weak, so the station order can be changed

using ATV Manual Tuning.

REMEMBER: Press TV at any time to select between

ATV and DTV (DTV Ant TV/Radio/Text, DTV Cable TV/

Radio/Text, DTV Sat TV/Radio/Text if available)

modes.

NOTE: The time will be set automatically by

transmission but can be advanced or decreased by

using Local Time Setting in the DTV Settings screen.

m Select Next and press OK. The Satellite Settings

screen will appear. From this window, you can add the

satellites that you wish to tune and configure detailed

settings for each one individually. See “Satellite

Settings” on page 24.

Highlight Done and press OK.

n If your satellite dish is movable, the following

Positioning screen will appear.

Press

B or b to highlight Positioning and press C or

c to find the dish position with the strongest signal

level.

Press

B or b to highlight Store Position and press

OK to store the dish position. Repeat steps 13 and 14

for the next satellite as necessary.

If your satellite dish is not movable, the Positioning

screen will not appear.

Adjust the dish position manually for the maximum

Signal Level strength.

Highlight Done and press OK.

o If the reception testing completes successfully, the

Auto Tuning startup screen will display.

You can select Scan Option from Free to Air and All.

p Press B or b to highlight Start Scan and press OK.

The television will start to search for available DVB-S

channels. The progress bar will indicate the scan

status.

When the search is complete, the Auto Tuning results

screen will display the total number of services found.

q Press B or b to move through the list to select a

channel and press OK to view.

From this menu, you can set the RF input configuration.

a Press MENU / C c to highlight Setup icon.

b Press B / C c to highlight System Setup icon.

c Press OK to display System Setup menu.

d Press B or b to select Ant/Cable/Satellite and press

C or c to select Antenna, Cable or Satellite.

NOTE: When you attempt to change the Ant/Cable/

Satellite setting, a warning message will appear

followed by PIN entry (if PIN has been set) and a

prompt for Auto Tuning.

SatelliteNo. Dish LNB

ASTRA 19.2˚E

Satellite Settings

Transponder : 1/83 (10743 MHz)

Dish Type : Fixed

Lower LOF (MHz) : 9600

Upper LOF (MHz) : 10600

Switch Type

None

LNB Power

Done

Positioning

Signal Level 30%

Go to Stored Position

Store Position

Transponder

1/83 (10743 MHz H)

Positioning

Go to 0

Satellite : ASTRA 19.2°E

Step Size

PLEASE NOTE

The Quick Setup menu can also be accessed at any

time from the Setup/System Setup menu.

Ant/Cable/Satellite (if available)

Auto Tuning - Satellite

Start Scan

Satellite

Free to Air

ASTRA(19.2°E)

Scan Option

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba 55ZL1 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Toshiba 55ZL1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info