Bedienungsanleitung Toshiba 58M9363DG (Seite 22 von 106) (Englisch)

560907

Zoom out

Zoom in

Vorherige Seite

1/106

Nächste Seite

English

SETTING UP YOUR TV

x If the reception testing completes successfully, the

Auto Tuning startup screen will display.

You can select Search Option from Free to Air or

All.

When choosing the search option All, all channels

(including encrypted ones) of the satellite will be

searched for. If you wish to only search for

unencrypted (free) channels, please select Free to

Air. In this case, the channel scan will be

completed faster.

y Press b to highlight Start Scan, and press OK.

The television will start to search for available

DVB-S channels. The progress bar will indicate

the scan status.

When the search is complete, the Auto Tuning

results screen will display the total number of

services found.

z Use B / b to move through the list to select a

channel, and then press OK to view.

From this menu, you can set the RF input configuration.

a Press and B / b to highlight Installation

icon.

b Press c and B / b to select Channel Tuning and

press OK.

c Press B / b to select Ant/Cable/Satellite and

press OK.

d Press B / b to select Antenna, Cable or

Satellite.

e Press B / b to highlight Next and press OK.

NOTE: When you attempt to change the Ant/

Cable/Satellite setting, a warning message will

appear followed by PIN entry (if PIN has been set)

and a prompt for Auto Tuning.

f When Ant/Cable/Satellite is set to Cable, the

following setting options will be provided in the

Auto Tuning screen.

Press

B / b to select an item and press c and

B / b to select your desired option.

With the exception of DTV Scan Type and DTV

Modulation items, all of the following items will have 2

operating modes. The first is Auto where the values for

each item are preset by the system. The second is an

Input mode where you will be able to enter a single value

in place of the pre-set value. If no channel is currently

tuned and the Input state is chosen, a system default

value will be shown. However, if a channel is currently

tuned when the item is accessed, the value of the current

channel will be displayed.

Operator Selection:

You can choose the Cable operator depending on the

Country you set.

DTV Scan Type:

This item determines whether a Quick Scan or a Full

Scan will be executed.

The Quick Scan is a simplified version of the Full Scan

that is designed to complete in less time.

DTV Start Frequency:

This sets the frequency from which the scan will begin.

DTV End Frequency:

This sets the frequency at which the scan will end.

DTV Modulation:

You can choose from five QAM modulation settings.

DTV Symbol Rate:

This is the baud rate (KS/s) of the scan.

DTV Network ID:

This is the Network ID to be utilized for the scan. This item

is greyed out when DTV Scan Type is set to “Full Scan”.

PLEASE NOTE

The Quick Setup menu can also be accessed at

any time from the Installation menu.

Ant/Cable/Satellite

Scan Type Fast Scan

Search Option Free to Air

Auto Tuning - Satellite

Start Scan

Tuning Mode DTV and ATV

Auto Tuning - Cable

Start Scan

DTV

Operator Selection Others

Scan Type Quick Scan

Start Frequency Auto

End Frequency Auto

Modulation Auto

Symbol Rate Auto

Network ID Auto

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba 58M9363DG Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Toshiba 58M9363DG

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info