Bedienungsanleitung Toshiba 58QA4263 (Seite 36 von 47) (Englisch)

804211

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

English - 35 - (**) Limited Models Only

Press the Stop or Back/Return button to stop a

playback.

The recordings will be named in the following format:

Channel Name_Date(Year/Month/Day)_Programme

Name.

Timeshift Recording

In order to use timeshift recording feature Time Shift

Mode option in the Record>Time Shift Mode menu



In timeshifting mode, the programme is paused and

simultaneously recorded to the connected USB storage

device. Press Pause/Play button while watching a

broadcast to activate timeshifting mode. Press Pause/

Play button again to resume the paused programme

from where you stopped. Press the Stop button to stop

timeshift recording and return to the live broadcast.

Disk Setup

wizard will be displayed when the Pause/Play button is

pressed. You can either choose Auto or Manual setup

mode. In Manual mode, if you prefer, you can format

your USB storage device and specify the storage space

that will be used for timeshift function. When the setup

is complete, the Disk Setup Result will be displayed.

Press OK button to exit.

Timeshift function will not be available for radio

broadcasts.

Disk Format

When using a new USB storage device, it is

Format

option in the Record>Device Info menu in Live TV

mode. Highlight the connected device on the Device

Info screen and press OK or Right directional button

to see the list of available options. Then highlight

Format and press OK   

dialogue will be displayed. Highlight Yes and press

OK to start formatting.

IMPORTANT: Formatting your USB storage device



converted to FAT32. In most cases operation errors will



Schedule List

You can add reminders or record timers using the

Schedule List menu. You can access the Schedule

List from the Record menu in Live TV mode. Highlight

Schedule List and press OK. Previously set timers

will be listed if any available.

Press the Yellow button to add a timer while the

Schedule List menu is displayed on the screen. You

Schedule

Type option as Reminder or Record. When other

parameters are set press the Green button. The timer

will be added to the list.

If any available, you can also edit or delete the timers

on this list. Highlight the timer of your choice and press

the Red button to edit. After you edited the timer press

the Green button to save changes. Highlight the timer

of your choice and press the Blue button to delete.

        

dialogue will be displayed on the screen. Highlight Yes

and press OK to delete the selected timer.

A warning message will be displayed if the time

intervals of two timers overlap. You can not set more

than one timer for the same time interval.

Press EXIT button to close the Schedule List.

CEC

With CEC function of your TV you can operate a

connected device with the TV remote control. This

function uses HDMI CEC (Consumer Electronics

Control) to communicate with the connected devices.

Devices must support HDMI CEC and must be

connected with an HDMI connection.

In order to make use of the CEC functionality the

related option in the menu should be switched on.

  󰀨  

following:

 Enter the Settings>Device Preferences>Inputs

menu on the Home Screen or TV options>Set-

tings>Device Preferences>Inputs menu in Live

TV mode.

 Scroll down to Consumer Electronic Control

(CEC) section. Check if the HDMI control option

is switched on.

 Highlight the HDMI control option and press OK to

󰀨

Make sure that all CEC settings are properly set up

on the connected CEC device. The CEC functionality

󰀨󰀨

might not work with all devices. If you connect a device

with HDMI CEC support to your TV, the related HDMI

input source will be renamed with the connected

device’s name.

To operate the connected CEC device, select the

related HDMI input source from the Inputs menu on

the Home Screen. Or press the Source button if the TV

is in Live TV mode and select the related HDMI input

source from the list. To terminate this operation and

control the TV via the remote again, press the Source

button, which will still be functional, on the remote and

switch to another source.

The TV remote is automatically able to control the

device once the connected HDMI source has been

selected. However not all buttons will be forwarded

to the device. Only devices that support CEC Remote

Control function will respond to the TV remote control.

Toshiba 58QA4263 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Toshiba 58QA4263

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info