Bedienungsanleitung Toshiba 58UL2163 (Seite 19 von 46) (Englisch)

804239

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

English - 18 - (**) Limited Models Only

Source button on the remote and then select your USB

storage device from the list of sources.

You can set your media browser preferences by using

the Settings menu. Settings menu can be accessed

via the information bar which is displayed on the

bottom of the screen while playing back a video or

an audio file or displaying a picture file. Press the

Info button if the information bar has disappeared,

highlight the gear wheel symbol positioned on the

right side of the information bar and press OK. Picture

Settings, Sound Settings, Media Browser Settings

and Options menus may be available depending on

the media file type and the model of your TV and its

features. The content of these menus may also differ

according to the type of the currently open media file.

Only Sound Settings menu will be available while

playing back audio files.

Loop/Shuffle Mode Operation

Start playback and activate

All files in the list will be

continuously played in

original order

Start playback and activate

The same file will be

played continuously

(repeat)

Start playback and activate

All files in the list will be

played once in random

order

Start playback and activate ,

All files in the list will be

continuously played in

the same random order

To use the functions on the information bar highlight the

symbol of the function and press OK. To change the

status of a function highlight the symbol of the function

and press OK as much as needed. If the symbol is

marked with a red cross, that means it is deactivated.

Custom Boot Up Logo

You can personalise your TV and see your favourite

image or photo on the screen each time your TV boots

up. To do this, copy your favourite image files onto a

USB disk and open them in the Media Browser. Select

USB input from the Sources menu and press OK. You

can also press the Source button on the remote and

then select your USB storage device from the list of

sources. When you have chosen the desired image,

highlight it and press OK to view it in full screen. Press

the Info button, highlight the gear wheel symbol on

the information bar and press OK. Select Options

and press OK to enter. Set Boot Logo option will be

available. Highlight it and press OK again to choose the

image as custom boot logo. A confirmation message

will be displayed. Select Yes and press OK again. If

the image is suitable(*) you will see it on the screen

during the TV’s next boot up.

Note: If you perform a First Time Installation the TV will

return to using the default logo, if any.

(*) Images must have an aspect ratio between 4:3 to 16:9

and they must be in .jpeg or .jpg file formats. The image

cannot be set as boot logo, if its resolution doesn’t appear

on the info banner.

FollowMe TV

With your mobile device you can stream the current

broadcast from your smart TV using the FollowMe

TV feature. Install the appropriate Smart Center

application to your mobile device. Start the application.

For further information on using this feature refer to

the instructions of the application you use.

Note: Depending on model, your TV may not support this

function. The application may not be compatible with all mobile

devices. Both of the devices must be connected to the same

network. This feature is only functional on TV source.

CEC

This function allows the user to control the CEC-

enabled devices, that are connected through HDMI

ports by using the remote control of the TV.

The CEC option in the Settings>System>Device

Settings menu should be set as Enabled at first.

Press the Source button and select the HDMI input

of the connected CEC device from the Sources List

menu. When a new CEC source device is connected,

it will be listed in Sources menu with its own name

instead of the connected HDMI port’s name (such as

DVD Player, Recorder 1, etc.).

The TV remote is automatically able to perform the

main functions after the connected HDMI source has

been selected. To terminate this operation and control

the TV via the remote again, press and hold the “0-

Zero” button on the remote control for 3 seconds.

You can disable the CEC functionality by setting the

related option under the Settings>System>Device

Settings menu accordingly.

The TV supports ARC (Audio Return Channel). This

feature is an audio link meant to replace other cables

between the TV and an audio system (A/V receiver or

speaker system).

When ARC is active, the TV will mute its other audio

outputs, except the headphone jack, automatically and

volume control buttons are directed to the connected

audio device. To activate ARC set the Sound Output

option in the Settings>Sound menu as HDMI ARC.

Note: ARC is supported only via the HDMI2 input.

System Audio Control

Allows an Audio Amplifier/Receiver to be used with

the TV. The volume can be controlled using the re-

mote control of the TV. To activate this feature set the

Sound Output option in the Settings>Sound menu

as HDMI ARC. When HDMI ARC option is selected,

CEC option will be set as Enabled automatically, if it

is not already set. The TV speakers will be muted and

the sound of the watched source will be provided from

the connected sound system.

Toshiba 58UL2163 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Toshiba 58UL2163

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info