Bedienungsanleitung Toshiba 65UA2063DA (Seite 16 von 34) (Englisch)

754467

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

English - 15 -

Available networks

When the WLAN function is turned on, available

wireless networks will be listed. Highlight See all and

press OK to see all networks. Select one and press OK

to connect. You may be asked to enter a password to

connect to the selected network, in case the network

is password protected. Additionally you can add new

networks by using the related options.

Other options

Add new network: Add networks with hidden SSID’s.

Scanning always available: You can let the location

service and other apps scan for networks, even when

 󰀨 OK to turn it on

󰀨

Wow:      󰀨

This function allows you to turn on or awaken your

TV via network.

Wol:    󰀨

This function allows you to turn on or awaken your TV

via wireless network.

Ethernet

Connected/Not connected: Displays the status of

the internet connection via Ethernet, IP and MAC

addresses.

Proxy settings: Set a HTTP proxy for browser manu-

ally. This proxy may not be used by other apps.

IP settings:

Channel

Channels

Options of this menu may change or become inac-

tive depending on the Channel Installation Mode

selection.

Channel Installation Mode - Antenna

Channel Scan: Start a scan for analogue and digital

channels. You can press the Back button to cancel the

scan. The channels that have already been found will

be stored in the channel list.

Update Scan: Search for updates. Previously added

channels will not be deleted, but any newly found

channels will be stored in the channel list.

Analog Manual Scan: Start a manual scan for ana-

logue channels. Enter the Start Frequency and then

select Scan Up or Scan Down. When a channel is

found the scan will be completed and the found channel

will be stored in the channel list.

Single RF Scan: Select the RF Channel by using

the Right/Left directional buttons. Signal Level and

Signal Quality of the selected channel will be shown.

Press OK to start scan on the selected RF channel.

The found channels will be stored in the channel list.

Manual Service Update: Start a service update

manually.

LCN: Set your preference for LCN. LCN is the Logical

Channel Number system that organizes available

broadcasts in accordance with a recognizable channel

number sequence (if available).

Channel Scan Type: Set your scan type preference.

Channel Store Type: Set your store type preference.

Favorite Network Select: Select your favourite net-

work. This menu option will be active, if more than only

one network is available.

Channel Skip: Set channels to be skipped when

switching the channels via Programme +/- buttons

on the remote. Highlight the desired channel/s on the

list and press OK to select/unselect.

Channel Sort: Replace the positions of the two

selected channels in the channel list. Highlight the

desired channels on the list and press OK to select.

When the second channel is selected, the position of

this channel will be replaced with the position of the



Channel Move: Move a channel to the position of

another channel. Highlight the channel you want to

move and press OK to select. Then do the same for a

second channel. When the second channel is selected,



of that channel.

Channel Edit: Edit channels in the channel list. Edit

the name and channel number of the selected channel

and display Network Name, Frequency, Color Sys-

tem and Sound System informations related to that

channel if available. Depending on the channel other

options may also be editable. You can press the Blue

button to delete the highlighted channel.

Analog Channel Fine-tune: Fine-tune an analogue

channel. A list of available analogue channels will be

displayed. Select the desired one from the list and

press OK button. Then change the frequency of the

channel by pressing Left/Right directional buttons.

Press OK to store the new frequency for that channel.

Press Back to cancel. This item may not be visible,

depending on whether or not the last watched channel

was analogue.

Clear Channel List: Delete all channels stored in the

channel list of the selected channel installation mode.



OK and press OK button to proceed. Highlight Cancel

and press OK to cancel.

Channel Installation Mode - Cable

Channel Scan: Start a scan for analogue and digital

cable channels. If available, operator options will be

listed. Select the desired one and press OK. Scan

Mode, Channel Scan Type, Frequency and Network

ID options may be available. The options may vary

Toshiba 65UA2063DA Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Toshiba 65UA2063DA

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info